moog-rk100121 | Rear Upper Control Arm | 2005-2017 Honda Odyssey | MOOG

  • moog-rk100121 360image 1
  • moog-rk100121 Rear Upper Control Arm and Ball Joint Assembly
  • moog-rk100121 Rear Upper Control Arm and Ball Joint Assembly
  • moog-rk100121 Rear Upper Control Arm and Ball Joint Assembly
  • moog-rk100121 Rear Upper Control Arm and Ball Joint Assembly
  • moog-rk100121 360image large 1

Rear Upper Control Arm and Ball Joint Assembly

Manufacturer: MOOG
Part Number: moog-rk100121
Price: $92.04

check_box In Stock check_box Ships Immediately


Suggested part for moog-rk100121: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
grease-gun-combo

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentRear Upper Control Arm and Ball Joint Assembly moog-rk100121 fits these vehicles:
Details

moog-rk100121 | Rear Upper Control Arm | 2005-2017 Honda Odyssey | MOOG

Allows for minus 2 to plus 4 degrees of camber

2011-2013 Honda Odyssey
  • Fits submodels: EX, EX-L, LX, and Touring
  • For the Touring Elite use rk100153
2014-2016 Honda Odyssey
  • Fits submodels: EX, EX-L, LX, SE, and Touring
  • For the Touring Elite use rk100153
2018-2019 Honda Odyssey
  • Fits submodels: Elite, EX, EX-L, and LX
  • For the Touring use rk100153

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

question_answer Customer Questions and Answers


Question:
I bought rk100121 UCAs. They have grease zerks. Your description of parts starting with RK says they are not serviceable and does not mention pressure relief. I’m worried I may have put too much grease in my new parts. Do they have pressure relief or not.
Answer:
moog-rk100121 with RK control arms they can be greaseable or not greaseable. Any greaseable Moog part will have a pressure relief for excess grease. It will eventually relieve the excess grease.

Question:
Do we know how much a turn changes in degrees?
Answer:
No. While doing the alignment you loosen the jam nuts and turn the long nut till you have the desired camber.

Question:
Does this carry a Lifetime or 3 year warranty?
Answer:
Moog RK control arms have a 3 year warranty.

Question:
Concerning RK100121. part was shipped with 2 grease fittings in a separate bag. But they are not addressed in the instructions.
Answer:
You received an extra grease fitting. The end of the control arm that has the tapered stud should have a grease zerk installed in the base plate.

Question:
Does this fit both passenger and driver control arms?
Answer:
moog-rk100121 will fit the left or right side upper control arm.

Question:
Is there a CK version of part number rk100121 for my 2013 Honda Odyssey?
Answer:
No, there is not a Ck version of part number rk100121 for the 2013 Honda Odyssey