add_shopping_cart Suggested Parts 2keyboard_arrow_down
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for moog-k9482 | Front Upper Ball Joint | Toyota 4Runner | Moog-K9482
- 5 Star (1)
-
-
- 25%
-
- 4 Star (1)
-
-
- 25%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (2)
-
-
- 50%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k9482
starstarstar_borderstar_borderstar_border" Review 2 Years Later "
The boots have rips in them. I rebuilt my whole front end with Moog. The next time I do it I will be using another brand. It seems like Moog has gone downhill.
verified_user Verified Buyer - Dustin Swisher - . MOOG moog-k9482 - 2 out of 5starstarstar_borderstar_borderstar_border
Boot issue hard to get on without damaging it (terrible). Editors Note: The installation of this type of boot could be very hard to install. Moog recommends that you use a large deep socket or a piece of pipe to install or big pair of channel locks to install.
verified_user Verified Buyer - Gary Burnett - . MOOG moog-k9482 - 2 out of 5starstarstarstarstar_border" Still holding up after 2 years "
Still working fine, only issue I have had was on install, some of the nuts and/or bolts werent working or stripped out, so I had to reuse some of the old ones
verified_user Verified Buyer - jonathan Morrison - . MOOG moog-k9482 - 4 out of 5starstarstarstarstar" Good fits as promissed "
Part was as good as original,easy to order(difficult to find that quality in Belgium in aftermarket items).\nOnly problem was getting the seal cap in place(had to machine a madril on the lathe)
verified_user Verified Buyer - Erwin Vandewal - . MOOG moog-k9482 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- I'm wondering if your ball joints k9482 are sold as a pair or as singles?
- Answer:
- Moog ball joints moog- k9482 are sold as single units, so you will need two to cover the left and right sides on most vehicles.
- Question:
- Do you sell just the dust boot?
- Answer:
- No, Moog does not sell just the dust boot.
- Question:
- Are there any installation instructions for the dust boot on part number k9482?
- Answer:
- Yes, you can find the installation instructions for the dust boot at https://fme-cat.com/livedocs/DYK11_102_ENG-R.pdf