add_shopping_cart Suggested Parts 2keyboard_arrow_down
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.


Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

Product Reviews for Front Left Lower ball Joint | Toyota 4Runner | K90262
- 5 Star (4)
-
-
- 80%
-
- 4 Star (1)
-
-
- 20%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k90262
starstarstarstarstar" After speaking with people that know Baja roads I chose to go with Moog parts "
Two years ago I purchased suspension parts off of Amazon and did not research the issue of quality. I had a shop install the Detroit Axle complete suspension kit. A week ago one of the ball joints broke as I was driving along. Fortunately at a slow speed. If I was going fast it could have been deadly. Not worth going with anything but the best.
verified_user Verified Buyer - Glenn M Temes - . MOOG moog-k90262 - 5 out of 5starstarstarstarstar" Good "
I wrote a more detailed review for the passenger side Ball Joint. This is a quality part and I was very pleased.
verified_user Verified Buyer - David Moore - . MOOG moog-k90262 - 5 out of 5starstarstarstarstar_border" Good "
Ive always ran moog whenever Ive replaced ball joints, these have been great but one thing is the bolts were a good 1/4" shorter than oem bolts, which made the 2 outside(closest to tire) bolts to short
verified_user Verified Buyer - COLIN BELLMAN - . MOOG moog-k90262 - 4 out of 5starstarstarstarstar" Good "
I wrote a more detailed review for the passenger side Ball Joint. This is a quality part and I was very pleased.
verified_user Verified Buyer - David Moore - . MOOG moog-k90262 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Where are moog parts made?
- Answer:
- Put this link in a Google or Yahoo search: https://www.suspension.com/blog/where-are-moog-parts-made/. This will explain where Moog parts are made.
- Question:
- What size zerk fitting does the Moog Lower Ball Joint use?
- Answer:
- The thread size for the grease zerk is 1/4x28 self tapping threads.
- Question:
- Where does the grease zerk go on the moog-k90262?
- Answer:
- I am showing that the hole for the grease zerk for the moog-k90262 is on the side of the joints housing.