moog-k9011 | Front Lower Ball Joint | Datsun 510 | MOOG-K9011

  • moog-k9011 360image 1
  • moog-k9011 Front Lower Ball Joint
  • moog-k9011 Front Lower Ball Joint
  • moog-k9011 Front Lower Ball Joint
  • moog-k9011 Front Lower Ball Joint
  • moog-k9011 360image large 1

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k9011
Price: $55.14

check_box In Stock check_box Ships Immediately


Suggested part for moog-k9011: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k9011: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-k9011 to beckarnley-101-3891
Beck Arnley beckarnley-101-3891
.
Price: $55.75
Warranty: 3 Years or 50000 Miles

question_answer Ask us a Question

FitmentFront Lower Ball Joint moog-k9011 fits these vehicles:
Details

moog-k9011 | Front Lower Ball Joint | Datsun 510 | MOOG-K9011

Fits Left or Right Side
Fits models from 10-1-69 onwards
Footnotes
  • Through July, 1970 use only on vehicles with replacement steering arms.

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint

Warranty

Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

MOOG moog-k9011

Product Reviews for moog-k9011 | Front Lower Ball Joint | Datsun 510 | MOOG-K9011

5 Star (2)
67%
4 Star (0)
0%
3 Star (1)
33%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar_border

MOOG moog-k9011

4 out of 5 based on 3 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Exact fit and replica design of OEM part "

All necessary hardware included for direct replacement.

verified_user Verified Buyer - - . MOOG moog-k9011 - 5 out of 5
L
verified_user

starstarstarstarstar" Great high quality product! "

Great product, much better quality than auto parts store house brand which had poor fit and finish. I bought the Duralast ball joints which are made in china and they were just cheaply made, did NOT come with any hardware and did not fit well into the control arm. MOOG ball joints were recommended to me and came with all hardware and fit perfectly. Wish I could upload a picture to show you but not allowed on this page. Part was made in Japan Just like my 1972 Datsun. not China..

verified_user Verified Buyer - - . MOOG moog-k9011 - 5 out of 5
M
verified_user

starstarstarstar_borderstar_border" Ehh "

The ball joint seemed like would work fine... i didn't need it seeing as how i upgraded to technotoytunings control arm and BOOM there was a ball joint on it already.

verified_user Verified Buyer - - . MOOG moog-k9011 - 3 out of 5
Fitment for moog-k9011