add_shopping_cart Suggested Parts 3keyboard_arrow_down
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.
Save time, rather than pressing out your old ball joints, replace the whole arm with Moog's value-driven control arm with pre-installed OE style bushings.
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Problem Solver Ball Joints
Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.
Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.
Warranty
Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.
Product Reviews for Front Lower Ball Joint | Nissan Xterra | MOOG-K80591
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k80591
starstarstarstarstar" Review 2 Years Later "
After 2 years the ball joint is still performing as expected.
verified_user Verified Buyer - TERIIEROOITERAI TEIVA - . MOOG moog-k80591 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Is the value of MOOG-K80591 one unit or pair?
- Answer:
- All Moog ball joints are sold individually. Not in pairs.
- Question:
- Can I get part number k80591 shipped to Chile?
- Answer:
- Yes, we do ship to Chile.
- Question:
- Im looking at part number K80591 and I was just curious what are the improvements over stock. Do they last longer?
- Answer:
- PROBLEM SOLVERŪ GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to in nhibit premature failure and improve fatigue strength GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box ...see more
- Question:
- Is part number k80591 pre-greased?
- Answer:
- Part number k80591 has some grease to keep its shelf life, but still needs to be greased after installation and every oil change.
- Question:
- Do you have the instruction on the part K80591?
- Answer:
- Yes, here is the installation instructions https://fme-cat.com/livedocs/AXCF4727.pdf
- Question:
- Do you sell a 90 degree zerk fitting for part number k80591?
- Answer:
- No, Moog does not sell the hardware separately from their parts.
- Question:
- Hello, I was curious if this comes with two lower ball joints. Also does it come with a grease fitting?
- Answer:
- All Moog ball joints are sold individually. Not in pairs. moog-k80591 is a greaseable ball joint and it includes the grease zerk.