moog-k750362 | Front Sway Bar End Link Replacement | Ford F350

  • moog-k750362 360image 1
  • moog-k750362 Front Sway Bar End Link
  • moog-k750362 Front Sway Bar End Link
  • moog-k750362 Front Sway Bar End Link
  • moog-k750362 Front Sway Bar End Link
  • moog-k750362 Front Sway Bar End Link
  • moog-k750362 360image large 1

Front Sway Bar End Link

Manufacturer: MOOG
Part Number: moog-k750362
Price: $40.78

check_box In Stock check_box Ships Immediately


  • Qty 1 Stabilizer Bar Link (Not sold in pairs)
Suggested part for moog-k750362: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
Grease Gun Combo

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Sway Bar End Link moog-k750362 fits these vehicles:
Details

moog-k750362 | Front Sway Bar End Link Replacement | Ford F350

SVT Raptor Models will use K750511 Instead.

Moog's Sway Bar Endlinks

A sway bar, or anti-roll bar, is designed to keep all four wheels solidly in contact with the road, track, or trail during a turn. But your sway bar doesn't do this job alone. Sway bar endlinks connect the sway bar to the rest of your suspension. Without these links your sway bar would just hang there, taking up space. Similarly, if your links are damaged or worn then your sway bar will not be performing at it's best.

Moog's line of sway bar endlinks come in a variety of shapes and styles, each one designed specifically for the vehicle it's listed for. Known for their high-quality parts, Moog stays true to form with each of their endlink designs. Maximize your vehicle's performance and value with a set of Moog's sway bar endlinks, all covered by Moog's lifetime warranty handled in-house here at DST.

Moog's Sway Bar Endlinks Box
Fitment for moog-k750362
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordF-1502017-2009Front4WD Quantity 2
FordF-1502012-2011FrontAWD Quantity 2
FordF-250 Super Duty2017-2010Front4WD Quantity 2
FordF-350 Super Duty2017-2010Front4WD Quantity 2

question_answer Customer Questions and Answers


Question:
Is Moog Part Number k750362 sold as a pair or as an individual part?
Answer:
Moog Part Number k750362is sold as an individual part.

Question:
Hi, I purchased 2 front sway bar links for my 2014 F150 XLT 4wd and the nuts go on easy for about an inch then are real tight where you need a wrench to tighten them, is this normal or should they be able to be spun on all the way down by hand then tightened down, or is the shaft or nut tapered for a locking fit ??
Answer:
The Moog endlink k750362 has a locking nut. So it screw on easy for the first few turns by hand and you will have to get a wrench or socket to tighten all the way.

Question:
Does the sway bar end links come with grease or will I need to grease them?
Answer:
Moog-k750362 is pre-greased. It is to preserve the part while it sits on the shelf. It must be greased after it is installed and every oil change with a good quality petroleum or synthetic chassis grease.

Question:
Do the sway bar links come pre-greased or will I need to do them on installation?
Answer:
After the end links is assembled they are greased. This is to preserve them while they sit on the shelf. After they are installed and every oil change the need to be greased.