moog-k6117t | Front Lower Ball Joint | Chevrolet G10 Van | K6117T

  • moog-k6117t 360image 1
  • moog-k6117t Front Lower Ball Joint
  • moog-k6117t Front Lower Ball Joint
  • moog-k6117t Front Lower Ball Joint
  • moog-k6117t Front Lower Ball Joint
  • moog-k6117t 360image large 1

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k6117t
Price: $35.00

check_box In Stock check_box Ships Immediately

Suggested part for moog-k6117t: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k6117t: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Lower Ball Joint moog-k6117t fits these vehicles:

moog-k6117t | Front Lower Ball Joint | Chevrolet G10 Van | K6117T

Fits Left or Right Side. Fits Non Diesel Models Only

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint


Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

MOOG moog-k6117t

Product Reviews for moog-k6117t | Front Lower Ball Joint | Chevrolet G10 Van | K6117T

5 Star (1)
4 Star (0)
3 Star (0)
2 Star (0)
1 Star (0)

MOOG moog-k6117t

5 out of 5 based on 1 user reviews. Write a Review


starstarstarstarstar" Review 2 Years Later "

They are doing fine. MOOG is the only way to go.

verified_user Verified Buyer - - . MOOG moog-k6117t - 5 out of 5
Fitment for moog-k6117t
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChevroletBlazer1974-1971Front LowerRWD Quantity 2
ChevroletC101986-1975Front Lower Quantity 2
ChevroletC10 Pickup1974-1971Front Lower Quantity 2
ChevroletC10 Suburban1986-1971Front Lower Quantity 2
ChevroletG101995-1975Front Lower Quantity 2
ChevroletG10 Van1974-1971Front Lower Quantity 2
ChevroletG201995-1975Front Lower Quantity 2
ChevroletG20 Van1974-1973Front Lower Quantity 2
ChevroletK5 Blazer1982-1975Front LowerRWD Quantity 2
ChevroletP101980-1975Front Lower Quantity 2
ChevroletP10 Van1974-1971Front Lower Quantity 2
ChevroletP301997-1991Front Lower Quantity 2
ChevroletR101987Front Lower Quantity 2
ChevroletR10 Suburban1988-1987Front Lower Quantity 2
ChevroletR1500 Suburban1991-1989Front Lower Quantity 2
GMCC151978-1975Front Lower Quantity 2
GMCC15 Suburban1978-1975Front Lower Quantity 2
GMCC15/C1500 Pickup1974-1971Front Lower Quantity 2
GMCC15/C1500 Suburban1974-1971Front Lower Quantity 2
GMCC15001986-1979Front Lower Quantity 2
GMCC1500 Suburban1986-1979Front Lower Quantity 2
GMCG151978-1975Front Lower Quantity 2
GMCG15/G1500 Van1974-1971Front Lower Quantity 2
GMCG15001995-1979Front Lower Quantity 2
GMCG251978-1975Front Lower Quantity 2
GMCG25/G2500 Van1974-1973Front Lower Quantity 2
GMCG25001995-1979Front Lower Quantity 2
GMCJimmy1982-1971Front LowerRWD Quantity 2
GMCP151978-1975Front Lower Quantity 2
GMCP15/P1500 Van1974-1971Front Lower Quantity 2
GMCP15001980-1979Front Lower Quantity 2
GMCP35001997-1991Front Lower Quantity 2
GMCR15001987Front Lower Quantity 2
GMCR1500 Suburban1991-1987Front Lower Quantity 2

question_answer Customer Questions and Answers

What is the length of part numbers K6141 and k6117t?
Part number k6117t has a length of 3.850 inches and part number K6141 has a length of 3.480 inches.

Do you have a replacement boot that will fit the K6117T ball joint?
Moog does not have replacement dust boots. I have universal polyurethane dust boots sold by size. Here is a link to them: Put that link in a Google/Yahoo search and it will bring the link up.

Will Moog ball joint K6117t fit in a 1981 Chevy C10 5.7L diesel.
Per Moog yes this ball joint will fit the 1981 Chevy C10 5.7L diesel

What are the specs of part number k6117t?
Part number k6117t has a height of 3.850 inches, inner diameter of 1.970 inches, stud taper per foot of .046, and a stud thread of .625-18.

What is the taper for the stud on part number Moog-K6117t?
Moog-K6117t Specifications: Stud Taper Per Foot: 0.046 Stud Thread: 0.625-18

Is part number K5651 ball joint still made or is the K6117t the same as that one?
The K5651 is no longer available. For fitment and specs on K6117t please follow this link:

On K6617T what is the tapered size on the stud?
For part number K6117T the Stud Taper Per Foot is 0.046 and the Stud Threads are 0.625-18