PTO Replacements for the Italian BP8 Series
OEM Rated Capacity of 95HP @ 540 RPM and 150HP @ 1000RPM
The part numbers below work for the Italian style Bondioli & Pavesi 8 Series with an OEM Rated Capacity of 95HP @ 540 RPM and 150HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | C | Part Number |
|---|---|---|---|---|
 |
4.19" (106.5mm) | 1.375" (34.9mm) | 4.61" (117mm) | 351AG |
Quick Disconnect Yoke
End Yokes
Round Bore with Keyway & Set Screw
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
1-3/8" | 5/16" | 1426 |
 |
1-1/2" | 5/16" and 3/8" | 1429 |
 |
1-1/2" | 3/8" | 1432 |
Spline Bore Clamp Yoke
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-3/4" | 20 | 1040 |
Drive Shaft Components
| Part Type | Image | Measurements | Part Number |
|---|---|---|---|
| Inner Tube Yoke |  |
Bore - 2.13" (54mm) | 1048 |
| Outer Tube Yoke |  |
Bore - 2.48" (63mm) | 1058 |
| Inner Profile Tube |  |
2.12" x 59" (54mm x 1500mm) | 1076 |
| Outer Profile Tube |  |
2.47" x 59" (63mm x 1500mm) | 1078 |
| Roll Pin |  |
0.34" x 3.17" (8mm x 80mm) | 1087 |
| Roll Pin |  |
0.50" x 3.18" (12mm x 80mm) | 1088 |
| Plastic Safety Shield (bearing not included) |
 |
- | 2073 |
| Bearing Kit |  |
- | 2088 |
