PTO Replacements for the Italian BP6 Series
OEM Rated Capacity of 64HP @ 540 RPM and 100HP @ 1000RPM
The part numbers below work for the Italian style Bondioli & Pavesi 6 Series with an OEM Rated Capacity of 64HP @ 540 RPM and 100HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | C | Part Number |
|---|---|---|---|---|
 |
3.62" (92mm) | 1.188" (30.2mm) | 4.06" (103mm) | 331AG |
Quick Disconnect Yoke
End Yokes
Round Bore with Keyway & Set Screw
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
1-1/2" | 3/8" | 1038 |
Round Bore with Hole for Shear Pin
| Image | Bore | Part Number |
|---|---|---|
 |
1-3/8" | 1036 |
Spline Bore Clamp Yoke
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-3/8" | 6 | 1039 |
Drive Shaft Components
| Part Type | Image | Measurements | Part Number |
|---|---|---|---|
| Inner Tube Yoke |  |
Bore - 1.78" (45mm) | 1046 |
| Outer Tube Yoke |  |
Bore - 2.13" (54mm) | 1056 |
| Inner Profile Tube |  |
1.76" x 59" (45mm x 1500mm) | 1065 |
| Outer Profile Tube |  |
2.12" x 59" (54mm x 1500mm) | 1076 |
| Roll Pin |  |
0.42" x 3.16" (10mm x 80mm) | 1086 |
| Plastic Safety Shield (bearing not included) |
 |
- | 2072 |
| Bearing Kit |  |
- | 2087 |
