PTO Replacements for the Italian BP4 Series
OEM Rated Capacity of 35HP @ 540 RPM and 55HP @ 1000RPM
The part numbers below work for the Italian style Bondioli & Pavesi 4 Series with an OEM Rated Capacity of 35HP @ 540 RPM and 55HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | C | Part Number |
|---|---|---|---|---|
 |
2.94" (74.6mm) | 1.063" (27mm) | 3.31" (84mm) | 344AG |
Quick Disconnect Yoke
Slide Lock
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-3/8" | 6 | 2033 |
End Yokes
Round Bore with Keyway & Set Screw
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
1-1/4" | 1/4" | 1026 |
 |
1-3/8" | 5/16" | 1027 |
 |
1-1/8" | 3/8" | 1033 |
Round Bore with Hole for Shear Pin
| Image | Bore | Part Number |
|---|---|---|
 |
1-3/8" | 1034 |
Drive Shaft Components
| Part Type | Image | Measurements | Part Number |
|---|---|---|---|
| Inner Tube Yoke |  |
Bore - 1.43" (36mm) | 1044 |
| Outer Tube Yoke |  |
Bore - 1.72" (43.5mm) | 1054 |
| Inner Profile Tube |  |
1.42" x 59" (36mm x 1500mm) | 1064 |
| Outer Profile Tube |  |
1.71" x 59" (43.5mm x 1500mm) | 1073 |
| Roll Pin |  |
0.34" x 2.35" (8mm x 60mm) | 1082 |
| Plastic Safety Shield (bearing not included) |
 |
- | 2071 |
| Bearing Kit |  |
- | 2083 |
