PTO Replacements for the Italian BP2 Series
OEM Rated Capacity of 21HP @ 540 RPM and 31HP @ 1000RPM
The part numbers below work for the Italian style Bondioli & Pavesi 2 Series with an OEM Rated Capacity of 21HP @ 540 RPM and 31HP @ 1000RPM.

Cross and Bearing Kit
Image | A | B | C | Grease Fitting | Part Number |
---|---|---|---|---|---|
![]() |
2.41" (61.3mm) | 0.938" (23.8mm) | 2.76" (70mm) | located in Cross | 341AG |
![]() |
2.41" (61.3mm) | 0.938" (23.8mm) | 2.76" (70mm) | located in Bearing | 341BL |

Drive Shaft Components
Part Type | Image | Measurements | Part Number |
---|---|---|---|
Inner Tube Yoke | ![]() |
Bore - 1.17" (29mm) | 1042 |
Outer Tube Yoke | ![]() |
Bore - 1.43" (36mm) | 1052 |
Inner Profile Tube | ![]() |
1.15" x 59" (29mm x 1500mm) | 1062 |
Outer Profile Tube | ![]() |
1.42" x 59" (36mm x 1500mm) | 1072 |
Roll Pin | ![]() |
0.34" x 2.35" (8mm x 60mm) | 1082 |
Plastic Safety Shield (bearing not included) |
![]() |
- | 2071 |
Bearing Kit | ![]() |
- | 2082 |