Moog's 1800 Series - PTO Replacements for the Domestic Standard Series 35
ASAE Category 4: 60HP @ 540RPM and 80HP @ 1000RPM
The part numbers below work for the Domestic Standard Series 35 for ASAE Category 4: 60HP @ 540RPM and 80HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | C | Grease Fitting | Part Number |
|---|---|---|---|---|---|
 |
3.21" | 1.250" | 3.5" to 3.6" | Grease Fitting in Cross | 964 |
 |
3.21" | 1.250" | 3.5" to 3.6" | Grease Fitting in Bearing | 934 |
Quick Disconnect Yoke
End Yokes
Round Bore with Keyway on Ear and Set Screw on Keyway
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
1" | 1/4" | 1800 |
 |
1-1/8" | 1/4" | 1801 |
 |
1-3/16" | 1/4" | 1803 |
 |
1-1/4" | 1/4" and 5/16" | 1814 |
 |
1-3/8" | 5/16" and 3/8" | 1815 |
 |
1-7/16" | 3/8" | 1811 |
 |
1-1/2" | 3/8" | 1812 |
 |
1-5/8" | 3/8" | 1813 |
Round Bore with Hole for Shear Pin
| Image | Bore | Pin Hole | Part Number |
|---|---|---|---|
 |
1-1/4" | 1/4" | 1806 |
 |
1-3/8" | 1/4" and 1/2" | 1810 |
 |
1-1/" | 1/4" | 1816 |
Torque Limiter Flange Yoke
Interchanges with Great Lakes Clutch
On 7-1/16" Bolt Circle for 5/16" Bolts
| Image | Pilot Diameter | B | Length | Part Number |
|---|---|---|---|---|
 |
1-1/16" | 1-1/4" | 5" | 1845 |
Drive Shaft Components
| Part Type | Image | Measurements | Part Number |
|---|---|---|---|
| Telescoping Drive Shaft Assembly |  |
48" OAL Compressed when Yokes are Added | 1848 |
| Yoke & Shaft Assembly |  |
Ear Hole Centerline to End 33-1/8" | 1847 |
| Yoke, Tube & Slip Sleeve Assembly |  |
Ear Hole Centerline to End 34-5/8" | 1849 |
| Square Shaft |  |
1-3/16" x 72" Long | 1877 |
| Round Tube |  |
2-1/2" – .120" Wall x 72" Long For Square Shaft Assembly |
1887 |
| Round Tube |  |
2-1/2" – .120" Wall x 72" Long For Splined Shaft Assembly |
1187 |
| Weld Yoke |  |
For 1-3/16" Square Shaft | 1854 |
| Weld Yoke |  |
For 2-1/8" – 120" Wall Tube For Square Shaft Assembly |
1855 |
| Weld Yoke |  |
For 1-11/16" – 20 Spline Shaft | 1864 |
| Weld Yoke |  |
For 2-1/2" – .120" Wall Tube For Splined Shaft Assembly |
1865 |
| Slip Sleeve |  |
For 1-3/16" Square Shaft and 2-1/8" – .120" Wall Tube | 1890 |
| Slip Sleeve |  |
For 1-11/16" – 20 Spline Shaft and 2-1/2" – .120" Wall Tube | 1194 |
| Plastic Safety Shield for Square Shaft (bearing not included) |
 |
- | 2071 |
| Bearing Kit for Square Shaft |  |
- | 2078 |
| Plastic Safety Shield for Spline Shaft (bearing not included) |
 |
- | 2072 |
| Bearing Kit for Spline Shaft |  |
- | 2079 |
