- 1-888-406-2330
- Mon-Fri 8am-5pm
- Se habla Espanol
Moog Power Take Off Replacements - 1500 Series (replaces Standard Series 1000)
Moog's 1500 Series - PTO Replacements for the Domestic Standard Series 1000
OEM Rated Capacity: 13HP @ 540RPM and 20HP @ 1000RPM
A power take-off, or PTO, is a kind of drive shaft that draws energy from the engine and powers an application on the other end. This set-up is typically found on tractors or commercial vehicles. Moog's premium PTO replacements are:
- Innovative - Designed by the same Moog Automotive Part Engineers
- Durable - Specifically built for the rough and tough life of agricultural and heavy-duty applications
- Safer - Built with forged and hardened materials for strength and durability
- Easier - Designed for the aftermarket service environment
The part numbers below work for the Domestic Standard Series 1000 for OEM Rated Capacity: 13HP @ 540RPM and 20HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | Grease Fitting | Part Number |
|---|---|---|---|---|
 |
1.50" | 0.938" | Grease Fitting in Cross | 338 |
 |
1.50" | 0.938" | Grease Fitting in Bearing | 838 |
Standard 2-1/2" End Yokes
Round Bore with Keyway on Gap at 12
| Image | Bore | Keyway | Set Screw | Part Number |
|---|---|---|---|---|
 |
5/8" | 3/16" | 3 or 9 | 1510 |
 |
3/4" | 3/16" | 6 | 1512 |
 |
3/4" | 3/16" | 9 | 1511 |
 |
3/4" | 1/4" | 9 | 1535 |
 |
13/16" | 3/16" | 9 | 1517 |
 |
13/16" | 1/4" | 9 | 1513 |
 |
13/16" | 3/16" and 1/4" | 9 | 1570 |
 |
7/8" | 3/16" | 9 | 1546 |
 |
7/8" | 1/4" | 6 | 1518 |
 |
7/8" | 1/4" | 9 | 1516 |
 |
7/8" | 3/16" and 1/4" | 9 | 1571 |
 |
15/16" | 1/4" | 9 | 1519 |
 |
1" | 3/16" | 9 | 1548 |
 |
1" | 1/4" | 6 | 1522 |
 |
1" | 1/4" | 9 | 1521 |
 |
1" | 3/16" and 1/4" | 9 | 1572 |
 |
1-1/16" | 1/4" | 3 or 9 | 1525 |
 |
1-1/8" | 1/4" | 9 | 1527 |
 |
1-1/8" | 5/16" | 9 | 1526 |
 |
1-1/8" | 1/4" and 5/16" | 9 | 1573 |
 |
1-3/16" | 1/4" and 5/16" | 9 | 1574 |
 |
1-1/4" | 1/4" | 9 | 1552 |
 |
1-1/4" | 5/16" | 6 | 1530 |
 |
1-1/4" | 5/16" | 6 | 1529 |
 |
1-1/4" | 1/4" and 5/16" | 9 | 1575 |
 |
1-3/8" | 5/16" | 9 | 1553 |
Round Bore with Hole for Shear Pin
| Image | Bore | Pin Hole | Part Number |
|---|---|---|---|
 |
15/16" | #6 Taper | 1520 |
 |
1" | 1/4" | 1550 |
 |
1" | 3/8" | 1523 |
 |
1-1/4" | 5/16" | 1531 |
 |
1-1/2" | 1/4" | 1532 |
Plain Round Bore
| Image | Bore | Part Number |
|---|---|---|
 |
3/4" | 1515 |
Square Bore with Set Screw
| Image | Bore | Part Number |
|---|---|---|
 |
3/4" | 1534 |
 |
7/8" | 1537 |
 |
1" | 1539 |
Hex Bore with Set Screw
| Image | Bore | Part Number |
|---|---|---|
 |
7/8" | 1560 |
 |
1-1/8" | 1540 |
Spline Bore with Set Screw
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
7/8" | 13 | 1567 |
Spline Bore with Hole for 5/16" Pin
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-3/8" | 6 | 1545 |
Standard 5-1/2" Slip Yokes
Round Bore with Keyway on Gap and Grease Fitting Opposite
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
3/4" | 3/16" | 1750 |
 |
13/16" | 1/4" | 1751 |
 |
7/8" | 1/4" | 1752 |
 |
1" | 1/4" | 1754 |
 |
1-1/8" | 5/16" | 1755 |
 |
1-1/4" | 5/16" | 1756 |
Square Bore with Grease Fitting
| Image | Bore | Part Number |
|---|---|---|
 |
3/4" | 1759 |
 |
7/8" | 1760 |
 |
1" | 1761 |
Hex Bore with Grease Fitting
| Image | Bore | Part Number |
|---|---|---|
 |
7/8" | 1772 |
 |
1-1/8" | 1766 |
Spline Bore with Grease Fitting
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-1/8" | 10 | 1763 |
 |
1-1/4" | 6 | 1765 |
Rectangular Bore with Grease Fitting
| Image | Bore | Part Number |
|---|---|---|
 |
3/4" x 7/8" | 1769 |
Spline Bore with Grease Fitting and Dust Seal
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-1/4" | 16 | 1782 |
Short 1-11/16" End Yokes
Round Bore with Keyway on Gap and Set Screw on Ear
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
5/8" | 3/16" | 1708* |
 |
3/4" | 3/16" | 1700* |
 |
7/8" | 1/4" | 1703* |
 |
1" | 1/4" | 1705* |
* Close Fit requires using ujoint Moog-838 with bearing lube.
Flange Yoke
| Image | Bolt Circle | Bolt Size | Pilot | Length | Part Number |
|---|---|---|---|---|---|
 |
2-3/4" | 5/16" | M 2-1/4" | 1-9/16" | 1779* |
Weld Yokes
| Image | Welds to | Length | Part Number |
|---|---|---|---|
 |
3/4" x 7/8" Shaft | 2-1/2" | 1558 |
 |
1" x 1-1/8" Tube | 2-1/2" | 1559 |
 |
2" – .083" Wall Tube | 2-1/2" | 1786 |
