Moog's 1300 Series - PTO Replacements for the Domestic Standard Series 14
ASAE Category 3; 38HP @ 540RPM and 60HP @ 1000RPM
The part numbers below work for the Domestic Standard Series 14 for ASAE Category 3; 38HP @ 540RPM and 60HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | C | Grease Fitting | Part Number |
|---|---|---|---|---|---|
 |
2.65" | 1.125" | 2.9" to 3.0" | Grease Fitting in Cross | 880 |
 |
2.65" | 1.125" | 2.9" to 3.0" | Grease Fitting in Bearing | 882 |
Quick Disconnect Yoke
End Yokes
Round Bore with Keyway On Ear & Set Screw on Keyway
| Image | Bore | Keyway | Part Number |
|---|---|---|---|
 |
1" | 1/4" | 1300 |
 |
1-1/8" | 1/4" and 5/16" | 1315 |
 |
1-1/4" | 1/4" and 5/16" | 1317 |
 |
1-3/8" | 5/16" | 1312 |
 |
1-7/16" | 3/8" | 1314 |
 |
1-1/2" | 3/8" | 1313 |
Round Bore with Keyway on Ear and Pin Hole on Gap
| Image | Bore | Keyway | Pin Size | Part Number |
|---|---|---|---|---|
 |
1-1/4" | 5/16" | 5/16" | 1311 |
 |
1-1/4" | 5/16" | 3/8" | 1309 |
Round Bore with Hole for Shear Pin
| Image | Bore | Pin Hole | Part Number |
|---|---|---|---|
 |
1-3/8" | 1/4" and 1/2" | 1326 |
Drive Shaft Components
| Part Type | Image | Measurements | Part Number |
|---|---|---|---|
| Telescoping Drive Shaft Assembly |  |
48" OAL Compressed when Yokes are Added | 1348 |
| Yoke & Shaft Assembly |  |
Ear Hole Centerline to End 35-5/8" | 1347 |
| Yoke, Tube & Slip Sleeve Assembly |  |
Ear Hole Centerline to End 36-1/8" | 1349 |
| Rectangular Shaft |  |
1" x 1-1/8" x 72" Long | 1277 |
| Round Tube |  |
2" – .083" Wall x 72" Long | 1387 |
| Weld Yoke |  |
For 1" x 1-1/8" Shaft | 1374 |
| Weld Yoke |  |
For 2" – .083" Wall Tube | 1375 |
| Plastic Safety Shield (bearing not included) |
 |
- | 2071 |
| Bearing Kit |  |
- | 2078 |
| Slip Sleeve |  |
- | 1390 |
