Moog's 1200 Series - PTO Replacements for the Domestic Standard Series 12
ASAE Category 2: 25HP @ 540RPM and 40HP @ 1000RPM
The part numbers below work for the Domestic Standard Series 12 for ASAE Category 2: 25HP @ 540RPM and 40HP @ 1000RPM.
Cross and Bearing Kit
| Image | A | B | Part Number |
|---|---|---|---|
 |
1.818" | 1.063" | 995 |
Quick Disconnect Yoke
Pin Type
| Image | Bore | Spline | Part Number |
|---|---|---|---|
 |
1-3/8" | 6 | 1291 |
End Yokes
Round Bore with Keyway On Ear at 3
| Image | Bore | Keyway | Set Screw | Length | Part Number |
|---|---|---|---|---|---|
 |
3/4" | 3/16" | 6 or 12 | 2-3/4" | 1200 |
 |
13/16" | 1/4" | 6 or 12 | 2-3/4" | 1201 |
 |
1" | 1/4" | 3 | 3-1/2" | 1211 |
 |
1" | 1/4" | 9 | 2-3/4" | 1209 |
 |
1-1/16" | 5/16" | 9 | 2-3/4" | 1214 |
 |
1-1/8" | 5/16" | 9 | 2-3/4" | 1217 |
 |
1-3/16" | 5/16" | 9 | 2-3/4" | 1221 |
 |
1-1/4" | 1/4" | 9 | 2-3/4" | 1223 |
| |
1-1/4" | 1/4" | None* | 3-1/2" | 1221 |
 |
1-1/4" | 5/16" | 3 | 3-1/2" | 1226 |
 |
1-1/8" | 5/16" | 9 | 2-3/4" | 1224 |
 |
1-1/8" | 1/4" and 5/16" | 3 | 3-1/2" | 1231 |
 |
1-3/8" | 5/16" | 3 | 3-1/2" | 1229 |
 |
1-1/2" | 5/16" | 9 | 2-3/4" | 1230 |
* Hole for 5/16" pin on gap at 6-12
Square Bore with Set Screw
| Image | Bore | Length | Part Number |
|---|---|---|---|
 |
7/8" | 2-3/4" | 1242 |
 |
1" | 2-3/4" | 1243 |
 |
1" | 3-1/2" | 1244 |
 |
1-1/8" | 3-1/2" | 1245 |
Square Bore with Hole for 3/8" Pin
| Image | Bore | Length | Part Number |
|---|---|---|---|
 |
1-1/8" | 3-1/2" | 1246 |
Spline bore with Set Screw
| Image | Bore | Spline | Length | Part Number |
|---|---|---|---|---|
 |
7/8" | 13 | 2-9/16" | 1267 |
Spline Bore with Hole for 5/16"
| Image | Bore | Spline | Length | Part Number |
|---|---|---|---|---|
 |
1-1/4" | 6 | 3-1/2" | 1254 |
 |
1-3/8" | 6 | 3-1/2" | 1257 |
Hex Bore with Set Screw
| Image | Bore | Length | Part Number |
|---|---|---|---|
 |
1-1/8" | 2-3/4" | 1247 |
Spline Bore with Machined Hub
Post Hole Digger Applications
| Image | Bore | Spline | Hub OD | Length | Part Number |
|---|---|---|---|---|---|
 |
1-3/16" | 10 | 1-5/8" | 3-13/16" | 1258 |
Slip Yokes
Round Bore with Keyway on Ear and Grease Fitting Opposite
| Image | Bore | Keyway | Length | Part Number |
|---|---|---|---|---|
 |
1" | 1/4" | 5-1/4" | 1263 |
 |
1-1/8" | 5/16" | 5-1/4" | 1264 |
 |
1-1/4" | 5/16" | 5-1/4" | 1265 |
Hex Bore with Grease Fitting
| Image | Bore | Length | Part Number |
|---|---|---|---|
 |
1-1/8" | 5-1/4" | 1275 |
Drive Shaft Components
| Part Type | Image | Measurements | Part Number |
|---|---|---|---|
| Telescoping Drive Shaft Assembly |  |
48" OAL Compressed when Yokes are Added | 1248 |
| Yoke & Shaft Assembly |  |
Ear Hole Centerline to End 37-3/8" | 1241 |
| Yoke & Tube Assembly |  |
Ear Hole Centerline to End 37-3/8" | 1249 |
| Rectangular Shaft |  |
1" x 1-1/8" x 72" Long | 1277 |
| Rectangular Shaft |  |
1-1/4" x 1-3/8" x 72" Long | 1287 |
| Weld Yoke |  |
For 1" x 1-1/8" Shaft | 1294 |
| Weld Yoke |  |
For 1-1/4" x 1-3/8" Tube | 1293 |
| Plastic Safety Shield (bearing not included) |
 |
- | 2071 |
| Bearing Kit |  |
- | 2078 |
