moog-rk8121 | Front Lower Control Arm | 1966-1967 Ford Falcon | MOOG

  • moog-rk8121 Front Lower Control Arm And Ball Joint
  • moog-rk8121 Front Lower Control Arm And Ball Joint

Front Lower Control Arm And Ball Joint

Manufacturer: MOOG
Part Number: moog-rk8121
Price: $63.70

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Lower Control Arm And Ball Joint moog-rk8121 fits these vehicles:
Details

moog-rk8121 | Front Lower Control Arm | 1966-1967 Ford Falcon | MOOG

1966-1967 Ford Fairlane
  • Fits submodels: 500, 500XL, and Base

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-rk8121

Product Reviews for moog-rk8121 | Front Lower Control Arm | 1966-1967 Ford Falcon | MOOG

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-rk8121

5 out of 5 based on 2 user reviews. Write a Review

R
verified_user

starstarstarstarstar" Review 2 Years Later "

Im very satisfied with the look and quality of these. Fit was very nice.

verified_user Verified Buyer - - . MOOG moog-rk8121 - 5 out of 5
A
verified_user

starstarstarstarstar" the parts fit perfet and already installed "

parts installed as soon as they arrived ,took car on a test drive runs like a new car,thanks for the help.

verified_user Verified Buyer - - . MOOG moog-rk8121 - 5 out of 5
Fitment for moog-rk8121
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordFairlane1967-1966Front Lower Quantity 2
FordFalcon1967-1966Front Lower Quantity 2
FordMustang1967Front Lower Quantity 2
FordRanchero1967-1966Front Lower Quantity 2
MercuryComet1967-1966Front Lower Quantity 2
MercuryCyclone1967-1966Front Lower Quantity 2

question_answer Customer Questions and Answers


Question:
Does the RK8121 LCA have to be greased? I see no grease fitting .
Answer:
Moog lower control arm RK8121 is not greaseable.

Question:
What is the distance between the center line of the bushing to the center line of the ball joint on Moog RK8121?
Answer:
The center of bushing to center of the ball joint is 399mm or 15.7 inches on the part RK8121

Question:
Front Lower Control Arm And Ball Joint moog-rk8121. Does this fit left and right side?
Answer:
Yes moog-rk8121 lower control arm will fit the left or right sides.

Question:
Does rk8121 come with a grease fitting on the ball joint?
Answer:
No, part number moog-rk8121 does not come with a grease fitting.

Question:
What are the dimensions of the bushing in part number rk8121?
Answer:
The bushing in the RK8121 has an OD of 1.42, an ID of .51 and a length of 2.08 inches

Question:
Does this lower control arm come with rubber bushing or polyurethane bushing?
Answer:
Moog parts are made out of rubber.