Front Control Arm - Dodge Magnum - MOOG moog-rk640664

  • moog-rk640664 Front Lower Control Arm - Rear Position
  • moog-rk640664 Front Lower Control Arm - Rear Position

Front Lower Control Arm - Rear Position

Manufacturer: MOOG
Part Number: moog-rk640664
Price: $62.91

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Lower Control Arm - Rear Position moog-rk640664 fits these vehicles:

Front Control Arm - Dodge Magnum - MOOG moog-rk640664

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-rk640664
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Chrysler3002011-2005Front Lower RearwardRWD Quantity 2 5.7L V8 345cid
Chrysler3002011Front Lower RearwardRWD Quantity 2 3.6L V6 3604cc/220cid
Chrysler3002010-2005Front Lower RearwardRWD Quantity 2 2.7L V6 2700cc/167cid
Chrysler3002010-2005Front Lower RearwardRWD Quantity 2 2.7L V6 2736cc/167cid
Chrysler3002010-2005Front Lower RearwardRWD Quantity 2 3.5L V6 3497cc/215cid
Chrysler3002010-2005Front Lower RearwardRWD Quantity 2 6.1L V8 6059cc/370cid
DodgeChallenger2011-2008Front Lower Rearward Quantity 2
DodgeCharger2010-2007Front Lower RearwardRWD Quantity 2
DodgeCharger2006Front Lower Rearward Quantity 2
DodgeMagnum2008-2005Front Lower RearwardRWD Quantity 2

question_answer Customer Questions and Answers


Question:
I need bushings for my front lower rearward control arm. I see you sell the one for the arm to the frame, but can I buy the one from the arm to the strut?
Answer:
Front lower arm to strut bushing is: K200200 Front lower inner rearward bushing is : K200894

Question:
Is part number rk640664 for both the passenger and driver side or are there two different part numbers?
Answer:
Part number rk640664 is for both the left and right sides.

Question:
I will like to know if that part fit in the left side
Answer:
This particular arm will work on both sides, left or right, two are required per vehicle.

Question:
Does this part the lower rear position come with everything needed?
Answer:
That would come with the bushings installed, although you would have to use some of the original hardware including the bolts.

Question:
Does Moog-RK640664 come with polyurethane bushings
Answer:
Moog-RK640664 does not come with Poly bushings installed. They come with pre-installed rubber bushings.

Question:
Does part number Moog-RK640664 fit both the left and right side rearward allocations
Answer:
Part number Moog-RK640664 fits both sides for the 2005 Chrysler 300c.