moog-rk620899 | Front Right Lower Control Arm | 1994-2004 Ford Mustang

  • moog-rk620899 360image 1
  • moog-rk620899 Front Lower Control Arm And Ball Joint - Passenger Side
  • moog-rk620899 Front Lower Control Arm And Ball Joint - Passenger Side
  • moog-rk620899 Front Lower Control Arm And Ball Joint - Passenger Side
  • moog-rk620899 Front Lower Control Arm And Ball Joint - Passenger Side
  • moog-rk620899 360image large 1

Front Lower Control Arm And Ball Joint - Passenger Side

Manufacturer: MOOG
Part Number: moog-rk620899
Price: $111.77

check_box In Stock check_box Ships Immediately


Suggested part for moog-rk620899: moog-rk620900
moog-rk620900 Front Lower Control Arm And Ball Joint - Driver Side
Front Lower Control Arm And Ball Joint - Driver Side

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Lower Control Arm And Ball Joint - Passenger Side moog-rk620899 fits these vehicles:
Details

moog-rk620899 | Front Right Lower Control Arm | 1994-2004 Ford Mustang

For the driver side use rk620900

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-rk620899

Product Reviews for moog-rk620899 | Front Right Lower Control Arm | 1994-2004 Ford Mustang

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-rk620899

5 out of 5 based on 1 user reviews. Write a Review

J
verified_user

starstarstarstarstar" all good "

arrived quick, well packaged, quality great, installed without issue, good improvement to my car suspension!

verified_user Verified Buyer - - . MOOG moog-rk620899 - 5 out of 5
Fitment for moog-rk620899
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordMustang2004-1994Front Right Lower Quantity 1

question_answer Customer Questions and Answers


Question:
Does part number RK620899 come with a grease fitting? If not, how do I grease it?
Answer:
No, part number RK620899 does not come with the grease fitting. It is sealed and does not need to be greased.

Question:
Moog-RK620899 Front Right Lower Control Arm: Does this come with the ball joint and bushings already installed.
Answer:
Part number Moog-RK620899 will come with the ball joint and control arm bushings already installed.

Question:
Is the front lower control arm supplied with standard bushings or hydro bushings?
Answer:
This control arm would have the standard bushings. Not the hydro bushings.

Question:
Do the front a arms from moog have your bushings?
Answer:
Moog control arms have their rubber bushings installed.

Question:
Since these ball joints on the control arm have no grease fittings, does that mean I put them on completely dry?
Answer:
Since the ball joint is non-greasable you do not have to maintain them. These ball joints are pre-greased. You do not have to grease for the life of the ball joint.

Question:
Will the moog-rk620899 front control arms bolt right into the factory mounts? Will any modification be needed to make them fit?
Answer:
Moog control arms are designed to replace OEM arms with no modifications. Basically bolt in replacement.