moog-rk620716 | Front Upper Control Arm - Forward | Audi A8 1997-1998

  • moog-rk620716 Front Upper Control Arm - Forward Position
  • moog-rk620716 Front Upper Control Arm - Forward Position

Front Upper Control Arm - Forward Position

Manufacturer: MOOG
Part Number: moog-rk620716
Price: $37.59

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-rk620716 to beckarnley-102-5008
Beck Arnley beckarnley-102-5008
. Standard OE replacement.
Price: $86.58
Warranty: 3 Years or 50000 Miles

question_answer Ask us a Question

FitmentFront Upper Control Arm - Forward Position moog-rk620716 fits these vehicles:
Details

moog-rk620716 | Front Upper Control Arm - Forward | Audi A8 1997-1998

Premium Moog Control Arm and Ball Joint Assembly
A complete control arm assembly that provides a simple, fast, cost efficient replacement of your old worn ball joints and control arms.

Audi A8 1997-1999
Front upper forward R series
  • For front passenger lower rearward r series use rk80563.
  • For front lower forward r series use rk90494.
  • For front driver lower rearward r series use rk80562.
  • Audi A8 Quattro 1997-1999
    Front upper forward R series
  • For front passenger lower rearward r series use rk80563.
  • For front lower forward r series use rk90494.
  • For front driver lower rearward r series use rk80562.
  • Audi S8 2001-2003
    Front upper forward R series
    • For front passenger lower rearward r series use rk80563.
    • For front driver upper rearward r series use rk80525.
    • For front driver upper forward r series use rk90699.
    • For front passenger upper rearward r series use rk80526.
    • For front passenger upper forward r series use rk90700.
    • For front lower forward r series use rk80556.
    • For front driver lower rearward r series use rk80562.

    What is the Difference Between Moog R Series and CK Control Arms?

    CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

    Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

    Moog Stamped Arms
    Moog Stamped Arms

    CK (K): Moog Problem Solver

    Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

    RK: Moog R Series

    The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

    Moog Forged Arms
    Moog Stamped Arms

    Type and Warranty

    Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.