moog-rk90494 | Front Lower Forward Control Arm | 1998-2004 Audi A4

  • moog-rk90494 Front Lower Control Arm And Ball Joint
  • moog-rk90494 Front Lower Control Arm And Ball Joint
  • moog-rk90494 Front Lower Control Arm And Ball Joint

Front Lower Control Arm And Ball Joint

Manufacturer: MOOG
Part Number: moog-rk90494
Price: $74.15

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-rk90494 to beckarnley-102-4967
Beck Arnley beckarnley-102-4967
. Standard OE replacement.
Price: $89.58
Warranty: 3 Years or 50000 Miles

question_answer Ask us a Question

FitmentFront Lower Control Arm And Ball Joint moog-rk90494 fits these vehicles:
Details

moog-rk90494 | Front Lower Forward Control Arm | 1998-2004 Audi A4

Fits Front Lower Forward Position
  • Audi A6 2004-2002 Fits 3.0L V6 2950cc
  • Audi A6 2004-2002 Fits 3.0L V6 2976cc
  • Audi A6 1998 Fits AHA Eng. ONLY
  • Audi A6 Quattro 2004-2002 Fits 3.0L V6 2950cc
  • Audi A6 Quattro 2004-2002 Fits 3.0L V6 2976cc
  • Audi A6 Quattro 2004-2001 Fits 2.7L V6 2671cc
  • Audi A6 Quattro 1998 Fits AHA Eng. ONLY
2001 Audi A6
  • Fits models with 16 inch wheels
2002-2004 Audi A6
  • Fits models with 16 inch wheels
2001 Audi A6 Quattro
  • Fits models with 16 inch wheels
2002-2004 Audi A6 Quattro
  • Fits models with 16 inch wheels
2000 Audi S4
  • Fits models with Chassis number from 8DY080001
  • For models with chassis number to 8DY080000 use rk80556
2003 Volkswagen Passat
  • Fits models with chassis number to 3B3072000
  • For models with chassis number from 3B3072001 use rk80556

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-rk90494
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
AudiA42001-1996Front Lower Forward Quantity 2
AudiA4 Quattro2001-1996Front Lower Forward Quantity 2
AudiA62004-2002Front Lower Forward Quantity 2 3.0L V6 2976cc
AudiA62000-1999Front Lower Forward Quantity 2
AudiA6 Quattro2004-2002Front Lower Forward Quantity 2 3.0L V6 2976cc
AudiA6 Quattro2004-2001Front Lower Forward Quantity 2 2.7L V6 2671cc
AudiA6 Quattro2000-1999Front Lower Forward Quantity 2
AudiA81999-1997Front Lower Forward Quantity 2
AudiA8 Quattro1999-1997Front Lower Forward Quantity 2
AudiS42002-2000Front Lower Forward Quantity 2
VolkswagenPassat2003-1998Front Lower Forward Quantity 2