moog-k7408 | Inner Tie Rod End Bushing Kit | Dodge Intrepid 93-04

  • moog-k7408 360image 1
  • moog-k7408 Inner Tie Rod Bushing
  • moog-k7408 Inner Tie Rod Bushing
  • moog-k7408 Inner Tie Rod Bushing
  • moog-k7408 Inner Tie Rod Bushing
  • moog-k7408 Inner Tie Rod Bushing
  • moog-k7408 360image large 1

Inner Tie Rod Bushing

Manufacturer: MOOG
Part Number: moog-k7408
Price: $20.98

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentInner Tie Rod Bushing moog-k7408 fits these vehicles:
Details

moog-k7408 | Inner Tie Rod End Bushing Kit | Dodge Intrepid 93-04

1 kit required per car. Problem solver complete kit includes 2 pc design bushings, bolts, lock plate and washers.
Footnotes
  • 1 Kit Required Per Car
  • Problem Solver Complete Kit Includes 2 Piece Design Bushings, Bolts, Lock Plate, and Washers

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

MOOG moog-k7408

Product Reviews for moog-k7408 | Inner Tie Rod End Bushing Kit | Dodge Intrepid 93-04

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k7408

5 out of 5 based on 2 user reviews. Write a Review

R
verified_user

starstarstarstarstar" Good quality parts for a reasonable prize. "

There was no issue with the parts themselves, however the installation can be very tricky, especially with the 3.5L engines as there is almost no room to operate. Shipping was very expensive, for shipping to sweden I payed more than the parts themselves cost, but nevertheless the parts where of good quality.

verified_user Verified Buyer - - . MOOG moog-k7408 - 5 out of 5
A
verified_user

starstarstarstarstar

The part arrived promptly and I had it installed with no problems at time of installation and no problems since. The part seems to be exactly what I needed and I feel very secure when driving.

verified_user Verified Buyer - - . MOOG moog-k7408 - 5 out of 5
Fitment for moog-k7408
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Chrysler300M2004-1999Front Inner Quantity 1
ChryslerConcorde2004-1993Front Inner Quantity 1
ChryslerIntrepid2004-1993Front Inner Quantity 1
ChryslerLHS2001-1994Front Inner Quantity 1
ChryslerNew Yorker1996-1994Front Inner Quantity 1
DodgeIntrepid2004-1993Front Inner Quantity 1
DodgeMonaco1992-1990Front Inner Quantity 1
EaglePremier1992-1988Front Inner Quantity 1
EagleVision1997-1993Front Inner Quantity 1

question_answer Customer Questions and Answers


Question:
How long is this?
Answer:
Part number moog-k7408 is 1.35 inches.