moog-k700536 | Front Sway Bar End Link Kit | 1997-2002 Ford Expedition

  • moog-k700536 360image 1
  • moog-k700536 Front Sway Bar EndLink
  • moog-k700536 Front Sway Bar EndLink
  • moog-k700536 Front Sway Bar EndLink
  • moog-k700536 Front Sway Bar EndLink
  • moog-k700536 Front Sway Bar EndLink
  • moog-k700536 360image large 1

Front Sway Bar EndLink

Manufacturer: MOOG
Part Number: moog-k700536
Price: $11.00

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Sway Bar EndLink moog-k700536 fits these vehicles:
Details

moog-k700536 | Front Sway Bar End Link Kit | 1997-2002 Ford Expedition

Premium Sway Bar Link Kit

Moog has engineered a new line of end links to enhance durability and performance.

Moog Problem Solver: Sway Bar End Links

Raising the bar

Moog's Problem Solver sway bar link kits have raised the bar for OE replacement links. Targeting the easily corroded traditional non-socket style links, Moog has engineered a new line of end links to enhance durability and performance. The entire line of Moog's Problem Solver end links are available right here at DST and include a lifetime warranty.

Moog Problem Solver Bulletins: Sway Bar Endlinks
Moog Problem Solver Bulletins: Sway Bar Endlinks

Original design and other supplier's flaws

The traditional non-socket style sway bar link that is installed factory on vehicles is highly susceptible to early failure. The OE design, as well as many aftermarket suppliers, use a small diameter bolt on the sway bar link. This small size bolt opens up the link to the damaging effects of road shock and corrosion. If the smaller bolt isn't bad enough, these links utilize neoprene bushings that do not stand up well to stress and weather conditions. Many suppliers also use a rolled steel sleeve which can allow harmful contaminants in, leading to corrosion and early failure.

Moog problem solving features

Moog's problem solver parts target factory defects or poor original design, replacing them with a better more durable part. Moog's sway bar link set provides enhanced performance and increased durability. This new design includes polyurethane bushings. These polyurethane bushings are much more durable than the neoprene.

Moog Problem Solver Bulletins: Sway Bar Endlinks
Moog Problem Solver Bulletins: Sway Bar Endlinks

Durable hardware

A black oxide 3/8" Grade 8 bolt provides increase strength and corrosion protection. Paired with a barrel nut that provides proper thread engagement, these "problem solving" end links are much easier to install. Nested washers are included to help keep the bushings centered during installation. The T6 aluminum hex spacer keeps contaminants out and is anodized to prevent corrosion.

Sway Bar End link Part Numbers

Moog has engineered several sizes of end links to cover numerous vehicles. While the length varies depending on the vehicle, all of Moog's Problem Solver sway bar end links include these problem-solving features.

Moog Problem Solver Bulletins: Sway Bar Endlinks
MOOG moog-k700536

Product Reviews for moog-k700536 | Front Sway Bar End Link Kit | 1997-2002 Ford Expedition

5 Star (20)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k700536

5 out of 5 based on 20 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Quality parts "

The fit is precise and easy to install with simple instructions included.

verified_user Verified Buyer - - . MOOG moog-k700536 - 5 out of 5
C
verified_user

starstarstarstarstar" Great fit and quality. "

The part was made well, all pieces fit nicely together. The instructions included were easy to follow. Although the parts fit well the only concern was the thread length. Compared to the OEM parts it is significantly shorter but upon installation the part did fit. Overall great part and great price. \nThank you.

verified_user Verified Buyer - - . MOOG moog-k700536 - 5 out of 5
J
verified_user

starstarstarstarstar" Review 2 Years Later "

Not necessarily a bad review. My truck is a 2001 Ford lightning it has been lowered using an Eibach suspension kit. The factory end links were still present. Ive avg 5000 a year in mileage since Ive owned it. Always garaged. Excellent shape. Anyways will try to provide a pic of condition of end links. My impression is the bushing part seeming to wear? Thx for any questions or comments! Editors Note: The bushings on that style of end link may show some wear. This is caused by the sway bar working. Slight amount of wear or crushing would be normal. If you use the truck hard (like I would) you might get more wear than normal.

verified_user Verified Buyer - - . MOOG moog-k700536 - 5 out of 5
T
verified_user

starstarstarstarstar" Review 2 Years Later "

Nice.

verified_user Verified Buyer - - . MOOG moog-k700536 - 5 out of 5

Fitment for moog-k700536
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordExpedition2002-1997Front Quantity 2
FordF-1502003-1997Front Quantity 2
FordF-150 Heritage2004Front4WD Quantity 2
FordF-150 Heritage2004FrontRWD Quantity 2
FordF-2501999-1997Front Quantity 2
LincolnBlackwood2002Front Quantity 2
LincolnNavigator2002-1998Front Quantity 2

question_answer Customer Questions and Answers


Question:
How long is this part?
Answer:
Part number moog-k700536 is 7 inches long.

Question:
Does Moog Part Number k700536 include a Sway Bar End Link for the driver and passenger side?
Answer:
Moog Part Number k700536 only supplies one Front Sway Bar End Link each side has to be bought individually.

Question:
Do you recommend changing both right and left side at the same time, even if only one side is bad?
Answer:
I would replace both end links. Better to do it one time instead of 2 times.

Question:
Front sway bar link dimensions?
Answer:
Here are the dimensions that Moog lists: Bolt Length (IN) 7.000 Sleeve Length (IN) 3.170

Question:
Does part number k700536 fit the left and right sides? Also is it sold in pairs?
Answer:
Part number k700536 will fit both the left and right sides and it is sold individually.

Question:
What is the bolt length of part number k700536?
Answer:
Part number k700536 has a bolt length of 7.0 inches.

Question:
Do I need to lubricate the polyurethane sway bar end links before installing them?
Answer:
You would not have to lube the sway bar end links moog-k700536.

Question:
Does the Front sway bar endlink (part #K700536) come 1 or 2 to the box?
Answer:
All Moog end links are sold individually. Not in pairs.

Question:
Does the kit p/n k700536 contain parts for both sides of the sway bar or do you need 2 kits.
Answer:
moog-k700536 are sold individually. If replacing the left and right sway bar end link you would have to purchase 2.