unarchive In The Box of moog-k700535 keyboard_arrow_down
- Qty 1 Stabilizer Bar Link
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog has engineered a new line of end links to enhance durability and performance.
Moog Problem Solver: Sway Bar End Links
Raising the bar
Moog's Problem Solver sway bar link kits have raised the bar for OE replacement links. Targeting the easily corroded traditional non-socket style links, Moog has engineered a new line of end links to enhance durability and performance. The entire line of Moog's Problem Solver end links are available right here at DST and include a lifetime warranty.
Original design and other supplier's flaws
The traditional non-socket style sway bar link that is installed factory on vehicles is highly susceptible to early failure. The OE design, as well as many aftermarket suppliers, use a small diameter bolt on the sway bar link. This small size bolt opens up the link to the damaging effects of road shock and corrosion. If the smaller bolt isn't bad enough, these links utilize neoprene bushings that do not stand up well to stress and weather conditions. Many suppliers also use a rolled steel sleeve which can allow harmful contaminants in, leading to corrosion and early failure.
Moog problem solving features
Moog's problem solver parts target factory defects or poor original design, replacing them with a better more durable part. Moog's sway bar link set provides enhanced performance and increased durability. This new design includes polyurethane bushings. These polyurethane bushings are much more durable than the neoprene.
Durable hardware
A black oxide 3/8" Grade 8 bolt provides increase strength and corrosion protection. Paired with a barrel nut that provides proper thread engagement, these "problem solving" end links are much easier to install. Nested washers are included to help keep the bushings centered during installation. The T6 aluminum hex spacer keeps contaminants out and is anodized to prevent corrosion.
Sway Bar End link Part Numbers
Moog has engineered several sizes of end links to cover numerous vehicles. While the length varies depending on the vehicle, all of Moog's Problem Solver sway bar end links include these problem-solving features.
Product Reviews for moog-k700535 | Front Sway Bar End Link Replacement | AMC Concord
- 5 Star (3)
-
-
- 75%
-
- 4 Star (1)
-
-
- 25%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k700535
starstarstarstarstar_border" High quality. "
When I ordered them I thought they had nylon not rubber, but I was wrong. My bad, but could have been better described. Still of great quality. Editor Note: The Moog k700535 grommets are made of polyurethane. Not rubber.
verified_user Verified Buyer - David Locher - . MOOG moog-k700535 - 4 out of 5starstarstarstarstar" Review 2 Years Later "
Excellent product, I recommend it ..... !!!!
verified_user Verified Buyer - juan carlos gil - . MOOG moog-k700535 - 5 out of 5starstarstarstarstar" Nicely made, quality item. "
Installed in my 08 TBSS works fine!
verified_user Verified Buyer - Ken Blackman - . MOOG moog-k700535 - 5 out of 5starstarstarstarstar" Great "
I have a 1966 Tempest LeMans Sprint that I installed these Front Sway Bar End Links on. The parts are well engineered and easy to install. I am very pleased.
verified_user Verified Buyer - Michael C. Cooper - . MOOG moog-k700535 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Is the moog-k700535 the correct endlinks for my 08 Trailblazer? is it sold as a pair?
- Answer:
- The moog-k700535 is the correct front endlink for the 08 Trailblazer. It is sold as a single link so you will need two of the moog-k700535 to cover left and right.
- Question:
- Is part number k700535 sold in a pair or individually?
- Answer:
- Part number k700535 is sold individually.