lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog has not only made these bushings cost efficient, they're also easy to install.
Grant Lewis- DST Parts GeekControlling your Chevy or GMC
Found out That You Can't get a Proper Alignment?
You've noticed that your Chevrolet or GMC SUV or light truck has started to pull to the left or right. Possibly even that your tires are wearing on the inside or outside edge of the tire. When you took your vehicle to have it aligned you were told that it couldn't be properly aligned because of excessive positive or negative camber. Here at DST we understand that you don't want to spend any more money on replacing tires. Moog has the solution to this problem in their front upper control arm camber kit K6669.
OE Design Flaw
The OE design of your Chevrolet or GMC vehicle's control arm bushings don't provide the adequate range necessary for a proper alignment to be made on your SUV or light truck. The excessive positive or negative camber is causing your vehicle to pull to the left or right, and this creates wear on the inside or outside edge of your tires.
Moog's Solution
Moog has addressed these issues with K6669. This bushing kit provides an effective, low-cost, means of obtaining the proper camber. K6669 offers an additional two degrees of camber change. Moog has used OE-type materials when making this bushing to maintain ride quality and service life.
Save Time and Money
Moog has not only made these bushings cost-efficient, they're also easy to install. As if all this wasn't good enough to start with, Moog wants you to feel safe and secure when you buy one of their products, so they've added a lifetime warranty to K6669. In order to make things even easier, our customer service team here at DST will handle your warranty for you, should anything ever happen to it. With the addition of the lifetime warranty, you can buy K6669 knowing that, should you ever need to replace this part, you'll never have to purchase it again.
question_answer Customer Questions and Answers
- Question:
- What material is used in bushing K6669? Rubber? Polyurethane?
- Answer:
- All Moog control arm and spring bushings are made of rubber.
- Question:
- Is the kit k6669 for one side only?
- Answer:
- Part number k6669 is for one side. You will need to order two kits to complete both sides.
- Question:
- Will part number k6669 fit my 03 f150?
- Answer:
- No, part number k6669 will not fit the 03 f150.