lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Pitman Arms
Pitman arms are designed to connect your steering box to your center link or drag link. The force you apply when turning your steering wheel travels through the pitman arm and is then used to move the links and rotate your wheels. As the proverbial "middle man" of your steering system, the pitman arm is incredibly important. A worn pitman arm will have an obvious affect on your handling. Sloppy or unresponsive steering, as well as wobbling and vibrations while driving, are common signs of a worn pitman arm. Moog offers its series of pitman arms, all made to meet or exceed OE specifications. Crafted as solid, one-piece components, Moog's pitman arms are well equipped to both outperform and outlast the OE. By upgrading to a Moog pitman arm, you'll not only restore your vehicle's steering performance, but you'll also make it last much longer. Additionally, Moog covers all of their pitman arms with a lifetime warranty handled in-house here at DST.
*Some kits include all new hardware including castle nut, cotter pin, etc. If you need new hardware check to be sure it is included in the kit.
Product Reviews for moog-k6536hd | Pitman Arm | 4 Grooves Heavy Duty | Silverado 1500
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k6536hd
starstarstarstarstar" Review 2 Years Later "
Havent put that many miles on it, but its holding up well as all Moog products do. Never had anything but excellence from Moog.
verified_user Verified Buyer - Donald Sharpe - . MOOG moog-k6536hd - 5 out of 5question_answer Customer Questions and Answers
- Question:
- I have read reviews that part number k6536hd is not keyed correctly as far as the grooves go. Some say their steering wheel is no longer centered after switching to your product. Has this been corrected?
- Answer:
- We checked with Moog directly to find out if this is still an issue with part number k6536hd and they have assured us that this problem has been corrected.
- Question:
- Can I purchase just the hardware from the moog-k6536hd?
- Answer:
- Unfortunately no, Moog does not offer their hardware alone from their parts.
- Question:
- Hi I am wondering what the difference is between the K6536 and the K6536hd.
- Answer:
- The main difference is the stud. The tapered stud for the k6536HD has extra heat treating. That makes the stud stronger. If your vehicle has oversized tires and wheels you would want to use the K6536HD.
- Question:
- Will part number k6536hd fit my 2002 Chevy Tahoe 4X4?
- Answer:
- Yes, Part Number moog-k6536HD will fit your 2002 Chevy Tahoe 4X4.
- Question:
- Are these pre-greased? If so, when do you grease part?
- Answer:
- The part K6536HD will have to be greased upon installation and every oil change.
- Question:
- How would I be able to tell if the 4 groove or 3 groove pitman arm fits my pickup?
- Answer:
- You have to take the big nut and lock washer off of the output shaft of the steering gear. Look to see if you have 3 or 4 wide splines on the shaft.
- Question:
- Do you have a pitman arm and idler arm for this truck?
- Answer:
- Idler arm: K6535HD Pitman arm: This is based on whether you have a 3 groove or 4 groove K6536HD for the 4 groove K6654HD for the 3 groove
- Question:
- I am looking for a HD Pitman Arm for my 2006 Chevrolet Silverado 1500 Crew Cab 4x4. I am not sure if I need to order a 3 or 4 spline?
- Answer:
- You will need to either call your Chevy dealer and give them your vin so they can tell you what groove your pitman''s arm is. Or remove the big nut and washer off the output shaft. Look at the shaft to see if you have 3 or 4 wide splines.