lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Control Arm Bushings
Controlling Comfort and Steering
If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.
Long-Term Performance and Long-Term Coverage
Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.
question_answer Customer Questions and Answers
- Question:
- Moog-K3166 - Jeep Control arm bushings- what is the inner diameter of the bushing k3166?
- Answer:
- Part number Moog-K3166 has an inner diameter of .40 inches.
- Question:
- What is the outside diameter of this bushing measured at the O.D. of the metal sleeve?
- Answer:
- Here are the dimensions listed in the Moog online catalog for moog-k3166: Length (IN) 2.010 Inside Diameter (IN) 0.400 Outside Diameter (IN) 1.800
- Question:
- I'm trying to find OEM fit bushings for the axle side of the upper control arm. I am going to install the moog OEM UCA and need the axle bushings. There is a lot of misinformation online and it's unclear what is the proper bushing. Some are saying it's the K-3128 and some say it's K3166. Can you please clear up the confusion.
- Answer:
- For the axle side of the upper control arm you would use k3166.
- Question:
- Do the bushings in part number k3166 fit into the axle housing on the upper control arm of my 2003 Jeep Wrangler?
- Answer:
- There are two bushings in the k3166 kit. One bushing will go into the arm itself and the other bushing will go into the axle.
- Question:
- Will the moog-k3166 fit the rear lower control arm bushings for my 06 Jeep Wrangler Sport?
- Answer:
- Unfortunately the moog-k3166 are only for the rear upper control arms. Moog unfortunately does not offer a rear lower control arm bushing for your 06 Jeep Wrangler Sport.
- Question:
- Is part number k3166 the only bushings Moog makes for the rear control arm on the 2001 Jeep Wrangler TJ? I need the lowers.
- Answer:
- Yes, part number k3166 are the only bushings for the rear control arm for the 2001 Jeep Wrangler TJ by Moog.
- Question:
- Moog-K3166 - Front Upper Control Arm Bushing - are these bushings for the axle-side of the upper control arm mount? or are they to be pressed into the upper control arms themselves and then installed in the vehicle.
- Answer:
- Part number Moog-K3166 includes the bushings for the Front and Rearward positions of the front upper control arm. One of the bushing in this kit will be pressed into the arm it self, the second will be pressed into the axle. You will need two of this s kit to cover both left and right upper control arm bushings. ...see more
- Question:
- Moog-K3166 - Jeep Upper control arm bushings- does the Moog K3166 upper control are bushing fit both the front and rear upper cas (2005 jeep wrangler unlimited TJ 4.0
- Answer:
- Part number Moog-K3166 will only fit the 05 Jeep Wrangler as the Rear upper control arm bushing replacements, For other Jeeps like the Cherokee and Comanche, this bushing kit is fitted as the front upper control arm bushings.
- Question:
- MOOG-K3166 - Control Arm Bushings - 1997 Jeep Wrangler TJ - Which is the correct part number for the front upper control arm bushings that press into the axle? K3166 or K7420. A third party reseller is saying it is the K3166, on your website it looks like it is the K7420. thanks.
- Answer:
- Part number Moog-K3166 is for the Rear upper control arm bushings. The Moog-K7420 is the correct front lower control arm bushings for the 97 Jeep Wrangler TJ. Unfortunately Moog does not offer a direct replacement for the front upper control arm bush hings of a 97 Jeep Wrangler TJ. ...see more
- Question:
- MOOG-K3166 - Jeep Front Upper Control arm bushing- Will this fit my front upper control arms on the axle side? please help i can not find the bushing i need. any help would be appreciated. thank you. 2004 jeep wj grand cherokee
- Answer:
- Moog-K3166 will not fit an 04 Jeep Grand Cherokee. Unfortunately Moog does not offer a front upper control arm bushing for your application.