moog-k201622 | 29.21mm Front Sway Bar Bushings | 94-10 Dodge Ram 3500

  • moog-k201622 360image 1
  • moog-k201622 Front Sway Bar Bushings - 32mm (1.26 Inch)
  • moog-k201622 Front Sway Bar Bushings - 32mm (1.26 Inch)
  • moog-k201622 Front Sway Bar Bushings - 32mm (1.26 Inch)
  • moog-k201622 Front Sway Bar Bushings - 32mm (1.26 Inch)
  • moog-k201622 Front Sway Bar Bushings - 32mm (1.26 Inch)
  • moog-k201622 360image large 1

Front Sway Bar Bushings - 32mm (1.26 Inch)

Manufacturer: MOOG
Part Number: moog-k201622
Price: $27.86

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Sway Bar Bushings - 32mm (1.26 Inch) moog-k201622 fits these vehicles:

moog-k201622 | 29.21mm Front Sway Bar Bushings | 94-10 Dodge Ram 3500

29.21mm Front Sway Bar Bushings with Synthetic Fabric Lining 94-10 Dodge Ram 3500 | 94-09 Ram 2500 | 97-06 Jeep Wrangler TJ

These 29.21mm (1.15in) Front Sway Bar Bushings also fit the 94-02 Dodge Ram 1500, 15-16 Ram 2500 4WD, and 11-12 Ram 3500 among others. These front sway bar bushings are an easy DIY replacement and the synthetic fabric lined inner diameter of these bushings will last longer than the original equipment (OE) sway bar bushings. This eliminates the squeaking that comes with age and wear, provides a long lasting grip on your sway bar, and can improve handling in a turn.

29mm front sway bar bushings 94-10 dodge ram 3500
sway bar bushing with worn inner diameter

Worn Sway Bar Bushings

The front sway bar connects the driver and passenger side wheels of your Ram or Dodge Ram and keeps the inside tire planted on the ground during a quick turn. When the OE bushings wear down then the front sway bar can shift and allow your inside wheel to lose some contact, and traction, while turning. If you routinely haul range cubes to the pasture, carry lumber to the work site, or otherwise have a commute that can be a little bouncy (like many trucks in north central Texas) then your OE bushings will have a short lifespan compared to the rest of your truck.

Problem Solved

When the front sway bar bushings wear down a gap can begin to form between the sway bar and the bushing. When you turn the sway bar will press further into the bushings, throwing off the connection between the driver and passenger side wheels that keeps them planted during a turn. This will increase body roll and cost you traction during a sharp turn. A worn sway bar bushing can also produce an annoying squeaking any time you hit a little bump in the road or make a turn. Moog's new 29.21mm front sway bar bushings with synthetic fabric lining can solve these problems.

synthetic fabric lined sway bar bushings for dodge and jeep
29mm front sway bar bushings 97-06 jeep wrangler tj

Lasting Performance

The new synthetic fabric lining creates a tough barrier between the sway bar and the sway bar bushings, reducing the wear that the friction of turning causes. This allows these front sway bar bushings to last 3 times longer than the OE bushings, increasing the time between necessary replacements. More durability means these bushings hold the sway bar securely, giving you better-turning performance and less body roll. The lining also eliminates the annoying squeaking that can develop as OE bushings age.

Moog's Problem Solver sway bar bushings are split along the side for an easy install that can be completed in your own garage or driveway with a simple socket set. Simply remove the bracket and OE bushing, slip the new sway bar bushing over the bar, and bolt the bracket back down. If you do happen to have any issues with these bushings Suspension.com will handle the warranty for you in-house to save you any hassle.

MOOG moog-k201622

Product Reviews for moog-k201622 | 29.21mm Front Sway Bar Bushings | 94-10 Dodge Ram 3500

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k201622

5 out of 5 based on 1 user reviews. Write a Review

R
verified_user

starstarstarstarstar" Parts fit perfectly and thanks for inquiring. "

However, I still have up and down squeaks. Editors Note: The suspension has many moving parts and the noise could be coming from any part. You would need to check out the front and rear suspension for the noise.

verified_user Verified Buyer - - . MOOG moog-k201622 - 5 out of 5
Fitment for moog-k201622