moog-k160066 | Coil Spring Insulator | Crown Victoria 1992-2002

  • moog-k160066 360image 1
  • moog-k160066 Front Upper Coil Spring Insulator
  • moog-k160066 Front Upper Coil Spring Insulator
  • moog-k160066 Front Upper Coil Spring Insulator
  • moog-k160066 Front Upper Coil Spring Insulator
  • moog-k160066 360image large 1

Front Upper Coil Spring Insulator

Manufacturer: MOOG
Part Number: moog-k160066
Price: $11.29

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Upper Coil Spring Insulator moog-k160066 fits these vehicles:

moog-k160066 | Coil Spring Insulator | Crown Victoria 1992-2002

Moog Coil Spring Isolators

Primarily designed to eliminate the vibrations and noise created by driving over uneven surfaces, coil springs come standard on almost every vehicle today. Another key component to this system is the coil spring isolators. While the coil springs take the edge off of the most intense bumps and vibrations, coil spring isolators are made to smooth out what's left. Additionally, coil spring isolators are used to protect the control arms from impacting the coil spring. OE isolators are usually made out of rubber. While rubber is good at absorbing vibrations, it doesn't last long against the constantly shifting weight and pressure.

Moog Bushing Box
Moog OE coil spring

OEM Distorts, Moog Restores

Moog's coil spring isolators are made of high-quality rubber. These isolators will restore your coil spring operation to like new status with the same comfort and isolation as the OE. The OE isolator can crush or warp until the coil spring is not properly aligned. Look to Moog when restoring your coil spring setup.

MOOG moog-k160066

Product Reviews for moog-k160066 | Coil Spring Insulator | Crown Victoria 1992-2002

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k160066

5 out of 5 based on 2 user reviews. Write a Review

V
verified_user

starstarstarstarstar" Good, it is necessary in the Grand Marquis "

Hi, I feel so good about the service and quality of\nThis suspension part K160066,\n it makes more quite and comfortable my Mercury Grand Marquis, \nI was looking for this number part in Mexico but actually No manufacture this front coil spring insulators, \nThey are necessary use for many reasons beacause it helps to absorbs some little vibrations from the irregular asphalt, more coils Springs life time , now my car feels like a airplane when I drive in highway ,\nI will buy from them again. \nThank you!\nGod bless you

verified_user Verified Buyer - - . MOOG moog-k160066 - 5 out of 5
V
verified_user

starstarstarstarstar" Good, it is necessary in the Grand Marquis "

Hi, I feel so good about the service and quality of\nThis suspension part K160066,\n it makes more quite and comfortable my Mercury Grand Marquis, \nI was looking for this number part in Mexico but actually No manufacture this front coil spring insulators, \nThey are necessary use for many reasons beacause it helps to absorbs some little vibrations from the irregular asphalt, more coils Springs life time , now my car feels like a airplane when I drive in highway ,\nI will buy from them again. \nThank you!\nGod bless you

verified_user Verified Buyer - - . MOOG moog-k160066 - 5 out of 5
Fitment for moog-k160066
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordCrown Victoria2002-1992Front Upper Quantity 2
FordLTD1986-1980Front Upper Quantity 2
FordLTD Crown Victoria1991-1987Front Upper Quantity 2
FordRanger2011-1998Front Upper Quantity 2
LincolnMark VI1983-1980Front Upper Quantity 2
LincolnTown Car2002-1981Front Upper Quantity 2
MazdaB23002010-2001Front Upper Quantity 2
MazdaB25002001-1998Front Upper Quantity 2
MazdaB30002008-1998Front Upper Quantity 2
MazdaB40002009-1998Front Upper Quantity 2
MercuryColony Park1991-1987Front Upper Quantity 2
MercuryGrand Marquis2002-1980Front Upper Quantity 2

question_answer Customer Questions and Answers


Question:
Is K160066 coil spring insulator sold as a pair or single piece?
Answer:
These are sold individually