lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Alignment Parts
Caster or Camber issues? Moog has got you covered with their line of alignment parts. Moog's engineers have designed this part to give you adjustability and flexibility with the alignment angles in your suspension. Whether caster, camber, or both, Moog's alignment parts will set your suspension up better than when you first drove the vehicle off the lot.
question_answer Customer Questions and Answers
- Question:
- What is the difference between the moog-k100070 and the moog-k100025 kits?
- Answer:
- The moog-k100025 is being superseded by the moog-k100070. This just means that the moog-k100070 is an updated design but will still provide the same adjustments as the moog-k100025.
- Question:
- Does this use the factory bolts?
- Answer:
- On part number moog-k100070 yes, you would reuse the factory bolts.
- Question:
- Will the moog-k100070 use the Factory bolts?
- Answer:
- The moog-k100070 can be used with your factory bolts as long as they are not damaged.
- Question:
- What diameter & thread pitch are the nuts in this kit.
- Answer:
- As a dealer of Moog, products I do not have that information. You would need to call Moog tech support at 800-325-8886.
- Question:
- Will part number k100070 fit a Mercedes ml270?
- Answer:
- No, part number k100070 will not fit the Mercedes ml270.
- Question:
- Do I need to order 1 or 2 kits of the k100070?
- Answer:
- You will need to order 2 kits of part number k100070.