lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
shuffle Cross References 1keyboard_arrow_down
. Standard OE replacement.
Price: $36.86
Warranty: 3 Years or 50000 Miles
Moog Tie Rods
Connecting the Driver to the Vehicle
Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.
Designed for Strength, Durability, and Longevity
Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.
Product Reviews for moog-ev800529 | Front Inner Tie Rod | Toyota Tacoma | EV800529
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-ev800529
starstarstarstarstar" Fit perfectly and made as well or better than OEM "
These fit perfectly and came with everything I need. I had 169k on my OEM rods which were wore out and one warped. I expect these to last as long or longer as quality built as they are.
verified_user Verified Buyer - Kevin Stephenson - . MOOG moog-ev800529 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- What is the length of part number ev800529?
- Answer:
- Part number ev800529 has a length of 10.570 inches.
- Question:
- Do the kit EV800529 come with boots?
- Answer:
- No, the kit EV800529 does not include the bellows boots.
- Question:
- Does the ev800529 come with the locking nut?
- Answer:
- No, the ev800529 does not come with the lock nut on there. However, we recommend getting for them instead is the blue loctite.
- Question:
- What is the rack thread size and rod end thread size of moog-ev800529?
- Answer:
- The rack end threads are m14x1.5 and rod end side i m16x1.5.
- Question:
- What are the specifications of the moog-ev800529?
- Answer:
- The moog-ev800529 is 10.57
- Question:
- Do these inner tie rods come pre-greased? Upon inspection of the joint, it looked dry. Is it recommended to grease upon installation?
- Answer:
- They would be filled with grease after they are assembled and sealed. No additional grease needs to be injected into the inner tie rod ev800529.