moog-es80805 | Front Outer Tie Rod | Ford Mustang | ES80805

  • moog-es80805 360image 1
  • moog-es80805 Front Outer Tie Rod End
  • moog-es80805 Front Outer Tie Rod End
  • moog-es80805 Front Outer Tie Rod End
  • moog-es80805 Front Outer Tie Rod End
  • moog-es80805 Front Outer Tie Rod End
  • moog-es80805 360image large 1

Front Outer Tie Rod End

Manufacturer: MOOG
Part Number: moog-es80805
Price: $34.68

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Outer Tie Rod End moog-es80805 fits these vehicles:

moog-es80805 | Front Outer Tie Rod | Ford Mustang | ES80805

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

MOOG moog-es80805

Product Reviews for moog-es80805 | Front Outer Tie Rod | Ford Mustang | ES80805

5 Star (4)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-es80805

5 out of 5 based on 4 user reviews. Write a Review

D
verified_user

starstarstarstarstar" Review 1 Year Later "

Working amazing after a year of use and helped stop my steering wheel shake! Amazing product!

verified_user Verified Buyer - - . MOOG moog-es80805 - 5 out of 5
D
verified_user

starstarstarstarstar" Review 1 Year Later "

Working amazing after a year of use and helped stop my steering wheel shake! Amazing product!

verified_user Verified Buyer - - . MOOG moog-es80805 - 5 out of 5
E
verified_user

starstarstarstarstar" Great "

Great part with grease fitting.

verified_user Verified Buyer - - . MOOG moog-es80805 - 5 out of 5
D
verified_user

starstarstarstarstar" Very Positive "

High quality MOOG parts arrived swiftly and without the pain of going to a local parts store, ordering, then having to spend more time and fuel to pick them up. Most parts stores that I called do not stock the Moog brand which I specifically wanted for my high performance car. Installed them two weeks ago and had my car aligned. Thank you MOOG and SUSPENSION.COM

verified_user Verified Buyer - - . MOOG moog-es80805 - 5 out of 5
Fitment for moog-es80805
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordMustang2014-2005Outer Quantity 2

question_answer Customer Questions and Answers


Question:
Is part number es80805 sold in pairs or individually?
Answer:
Part number es80805 is sold individually.

Question:
What are the stud and rod threads on part number es80805?
Answer:
For part number es80805, the rod thread is M14x1.5-RH and the stud thread is M12x1.25-RH.

Question:
Does this part come pre-greased or do I need to grease after installation?
Answer:
The tie rod end will have a very small amount of grease in it, however once you install it you need to grease it the rest of the way and with each oil change.