• moog-es3624 Inner Tie Rod End - Passenger Side At Pitman Arm - 1st Design

Inner Tie Rod End - Passenger Side At Pitman Arm - 1st Design

Manufacturer: MOOG
Part Number: moog-es3624

Purchase


Price: $37.29

In Stock Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentInner Tie Rod End - Passenger Side At Pitman Arm - 1st Design moog-es3624 fits these vehicles:
Details

Front Inner Tie Rod End | 07-16 Jeep Wrangler | MOOG

At Pitman Arm
Uses a steering linkage with a tapered hole in the drag link for steering damper mounting.

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterwards.
Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.
MOOG moog-es3624

Product Reviews for Front Inner Tie Rod End moog-es3624

MOOG moog-es3624



5 out of 5 based on 19 user reviews. Write a Review

Very good service
5 out of 5
Robin Barnes - . MOOG moog-es3624
Very good service
5 out of 5
Robin Barnes - . MOOG moog-es3624
serious parts
5 out of 5
Devillers David - . MOOG moog-es3624
Very good service
5 out of 5
Robin Barnes - . MOOG moog-es3624
Sweet!
5 out of 5
Josh Cantrell - . MOOG moog-es3624
Good
5 out of 5
Manfred Adler - . MOOG moog-es3624
Favorable
5 out of 5
Roger Kasten Jr - . MOOG moog-es3624
Satisfied
5 out of 5
Bronson Guzman - . MOOG moog-es3624
perfect upgrade for jeep jk
5 out of 5
victor gautreau - . MOOG moog-es3624
Great value and great product
5 out of 5
Brian Lynch - . MOOG moog-es3624
When I say put
5 out of 5
HUGO RIERA - . MOOG moog-es3624
Solid design, and greasable, to boot.
5 out of 5
Michael Olshove - . MOOG moog-es3624
good HD option for the jeep jk
5 out of 5
Michael Bradley - . MOOG moog-es3624
Great ends!
5 out of 5
Scott - . MOOG moog-es3624
Good except for zerk fitting
3 out of 5
David Roberts - . MOOG moog-es3624
Does its job...
5 out of 5
corey dufrene - . MOOG moog-es3624
great fixed the problem
5 out of 5
terry nelson - . MOOG moog-es3624
Great part
5 out of 5
Scott H. Staus - . MOOG moog-es3624
great product
5 out of 5
Scot - . MOOG moog-es3624
Fitment for moog-es3624
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
DodgeRam 15002008-2006Inner4WD Quantity 1
DodgeRam 25002008-2003Inner4WD Quantity 1
DodgeRam 35002008-2003Inner Quantity 1
JeepWrangler2017-2007Inner Quantity 1
JeepWrangler JK2018Inner Quantity 1

Customer Questions and Answers


0
Votes
Question:
What are the thread specs on es3624?
Answer:
The thread specs on part number moog-es3624 are 1.0-18R.

0
Votes
Question:
Is part number es3624 the tie rod at the pitman arm for the 2012 jeep wrangler JK?
Answer:
Yes, part number es3624 is the tie rod at the pitman arm for the 2012 jeep wrangler JK.

0
Votes
Question:
What is the length?
Answer:
The length on part number moog-es3624 is 6.54 from stud center to end.

0
Votes
Question:
Will part number es3624 work for the right hand drive?
Answer:
No, part number es3624 is for left hand drive.