moog-es355rl | Front Inner Tie Rod End | 1965-1971 Chrysler 300 | MOOG

  • moog-es355rl 360image 1
  • moog-es355rl Front Inner Tie Rod End
  • moog-es355rl Front Inner Tie Rod End
  • moog-es355rl Front Inner Tie Rod End
  • moog-es355rl Front Inner Tie Rod End
  • moog-es355rl Front Inner Tie Rod End
  • moog-es355rl 360image large 1

Front Inner Tie Rod End

Manufacturer: MOOG
Part Number: moog-es355rl
Price: $28.81

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Inner Tie Rod End moog-es355rl fits these vehicles:
Details

moog-es355rl | Front Inner Tie Rod End | 1965-1971 Chrysler 300 | MOOG

Fits Left or Right Side

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

MOOG moog-es355rl

Product Reviews for moog-es355rl | Front Inner Tie Rod End | 1965-1971 Chrysler 300 | MOOG

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-es355rl

5 out of 5 based on 1 user reviews. Write a Review

M
verified_user

starstarstarstarstar" 100% ok "

Very good parts.

verified_user Verified Buyer - - . MOOG moog-es355rl - 5 out of 5
Fitment for moog-es355rl
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Chrysler3001971-1965Inner Quantity 2
ChryslerCordoba1983-1980Inner Quantity 2
ChryslerFifth Avenue1989-1983Inner Quantity 2
ChryslerImperial1983-1974Inner Quantity 2
ChryslerLeBaron1981-1977Inner Quantity 2
ChryslerNew Yorker1982-1965Inner Quantity 2
ChryslerNewport1978-1965Inner Quantity 2
ChryslerTown & Country1981-1966Inner Quantity 2
ChryslerTown & Country1965Inner Quantity 2 6.7L V8 6769cc/413cid
Dodge8801965Inner Quantity 2
DodgeAspen1980-1979Inner Quantity 2
DodgeAspen1978-1976Inner Quantity 1
DodgeD100 Pickup1971-1969Left Outer Quantity 1
DodgeD200 Pickup1971-1969Left Outer Quantity 1
DodgeDiplomat1989-1977Inner Quantity 2
DodgeMirada1983-1980Inner Quantity 2
DodgeMonaco1976-1965Inner Quantity 2
DodgePolara1973-1965Inner Quantity 2
DodgeRoyal Monaco1977-1975Inner Quantity 2
FargoD100 Pickup1971-1969Left Outer Quantity 1
FargoD200 Pickup1971-1969Left Outer Quantity 1
PlymouthCaravelle1989-1980Inner Quantity 2
PlymouthFury1974-1965Inner Quantity 2
PlymouthFury I1974-1968Inner Quantity 2
PlymouthFury II1974-1965Inner Quantity 2
PlymouthFury III1974-1965Inner Quantity 2
PlymouthGran Fury1989-1972Inner Quantity 2
PlymouthVolare1980-1976Inner Quantity 2

question_answer Customer Questions and Answers


Question:
Do you have specs on part ES355rl?
Answer:
Specs are: Rod Thread= 687-18L Stud Diameter Dimension (top in.) = 0.558 Stud Diameter Dimension (bottom in.) = 0.626 End 1 Thread Diameter = 0.687 in End 2 Thread Diameter = 1/2 in

Question:
I see you don't have any for 1964, do the 1965 es355rl still fit?
Answer:
Unfortunately, the 65's won't work on the 64's per the Moog tech support team. I do apologize for this inconvenience.