moog-es3461 | Front Outer Tie Rod End | 1998-2011 Ford Ranger | MOOG

  • moog-es3461 360image 1
  • moog-es3461 Front Outer Tie Rod End
  • moog-es3461 Front Outer Tie Rod End
  • moog-es3461 Front Outer Tie Rod End
  • moog-es3461 Front Outer Tie Rod End
  • moog-es3461 Front Outer Tie Rod End
  • moog-es3461 360image large 1

Front Outer Tie Rod End

Manufacturer: MOOG
Part Number: moog-es3461
Price: $31.83

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

Cross Reference from moog-es3461 to beckarnley-101-5279
Beck Arnley beckarnley-101-5279
. Standard OE replacement and is not greaseable.
Price: $24.62
Warranty: 3 Years or 50000 Miles

FitmentFront Outer Tie Rod End moog-es3461 fits these vehicles:
Details

moog-es3461 | Front Outer Tie Rod End | 1998-2011 Ford Ranger | MOOG

Fits Left or Right Side

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

MOOG moog-es3461

Product Reviews for moog-es3461 | Front Outer Tie Rod End | 1998-2011 Ford Ranger | MOOG

5 Star (4)
80%
4 Star (1)
20%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-es3461

5 out of 5 based on 5 user reviews. Write a Review

L
verified_user

starstarstarstarstar" Great quality exceeded my expectations "

Will buy all my parts direct from these guys.

verified_user Verified Buyer - - . MOOG moog-es3461 - 5 out of 5
L
verified_user

starstarstarstarstar" Great quality exceeded my expectations "

Will buy all my parts direct from these guys.

verified_user Verified Buyer - - . MOOG moog-es3461 - 5 out of 5
J
verified_user

starstarstarstarstar_border" Ok "

Installed in my 2003 Ford Explorer...last thing I went to do was thread in the grease fitting. The hole was not threaded. Had to take apart and bring back to Advance. Guys at the counter confirmed there were no threads, exchanged for another one. Next one went in fine.\n\nI expect better from Moog. \n

verified_user Verified Buyer - - . MOOG moog-es3461 - 4 out of 5
J
verified_user

starstarstarstarstar" Awesome "

Excellent quality part. Its beefier than the original.

verified_user Verified Buyer - - . MOOG moog-es3461 - 5 out of 5

Fitment for moog-es3461
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordExplorer2003-1998Outer Quantity 2
FordRanger2011-1998Outer Quantity 2
MazdaB23002003-2001Outer Quantity 2
MazdaB25002001-1998Outer Quantity 2
MazdaB30002004-1998Outer Quantity 2
MazdaB40002004-1998Outer Quantity 2
MercuryMountaineer2003-1998Outer Quantity 2

question_answer Customer Questions and Answers


Question:
Can I just get the dust boot off of the moog-es3461 tie rod?
Answer:
Moog unfortunately does not sell their boots alone for their parts.

Question:
What is the rod thread on part on this tie rod end?
Answer:
On part number moog-es3461 the rod thread M16-1.5-6G.

Question:
Does part number es3461 have a lifetime warranty?
Answer:
Yes, part number es3461 has a lifetime warranty.

Question:
Is the dust boot on part number es3461 covered under warranty?
Answer:
No, the dust boot on part number es3461 is not covered under warranty.