lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Tie Rods
Connecting the Driver to the Vehicle
Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.
Designed for Strength, Durability, and Longevity
Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.
Product Reviews for moog-ds1464 | Front Left Inner Tie Rod | 03-06 Dodge Ram 2500 | MOOG
- 5 Star (2)
-
-
- 67%
-
- 4 Star (1)
-
-
- 33%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-ds1464
starstarstarstarstar_border" Good stuff "
Delivery from the US to Europe was really fast. I had to shorten this part by about five millimeters to get it wide enough into the hull that connects it to the other side.
verified_user Verified Buyer - Manfred Adler - . MOOG moog-ds1464 - 4 out of 5starstarstarstarstar" fixed the problem "
I have an 05 dodge ram 2500 cummins with the dreaded death wobble. replaced all my tie rod ends cured the problem. The moog joints are much beefier than stock. very pleased
verified_user Verified Buyer - terry nelson - . MOOG moog-ds1464 - 5 out of 5starstarstarstarstar
Product was priced right and was exactly as described. Very easy to install and works perfectly. Thanks
verified_user Verified Buyer - Robert Henning - . MOOG moog-ds1464 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- I keep seeing a
- Answer:
- The difference between 1st and 2nd design is how the steering dampener (shock) is installed. The 1st design steering the dampener is installed using a tapered stud to a tapered hole in the tie rod. The second design the steering dampener is attached to a bracket with 2 u-bolts and a stud sticking out of the bracket. To ensure fitment you need to look at the dampener is attached to the tie rod. ...see more
- Question:
- Dear sir, do you ship to Chile?
- Answer:
- We ship all over the world.
- Question:
- Do you sell the boot for the moog-ds1464 by it self?
- Answer:
- Unfortunately no, Moog does not sell their dust boots alone.