Front Coil Springs - Dodge D250 - MOOG moog-7226s

  • moog-7226s Front Coil Springs - Pair

Front Coil Springs - Pair

Manufacturer: MOOG
Part Number: moog-7226s
Price: $195.66

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Coil Springs - Pair moog-7226s fits these vehicles:

Front Coil Springs - Dodge D250 - MOOG moog-7226s

Moog's Coil Springs

Designed to be more than OE replacements, Moog's coil springs come with a variety of shapes and ends. This selection, combined with Moog's lifetime warranty handled right here at DST, lends security to whichever choice you might make. While they are certainly higher quality than the OE springs, each of Moog's coil springs were designed to still have the same spring rate. Having the same spring rate allows for an easier install and a more accurate restoration for your vehicle's ride.

End Type

Coil Springs have three types of ends: Square, Tangential and Pigtail. It is important that you select a coil spring that matches BOTH your end types, otherwise the coil spring won't fit. Your OE coil spring could have the same type ends, or a combination of both.

Moog Universal Coil Springs Squared

Type 1: Squared

With a Squared end, the final coil is bent back to touch the coil before it. The easiest way to know if you have a squared end is to stand the coil spring straight up. A squared end will let the spring sit flat on the ground and stay standing.

Type 2: Tangential

A Tangential end looks like it would just keep on going forever if the spring continued. The last coil is not bent back and it is not the pigtail (see below). Instead, the tangential coil spring looks as though a normal coil was just cut, otherwise, it would have kept winding on forever. If you tried to stand it up straight, it would fall.

Moog Universal Coil Springs Squared
Moog Universal Coil Springs Squared

Type 3: Pigtail

The Pigtail is probably the easiest to identify. Its defining characteristic is the pig tail shape at the end. The final coil is squared off, but is a much smaller diameter than the rest of the spring.

Spring Type

Moog offers two types of springs for a universal fitment: Constant Rate and Variable Rate.

Constant Rate

Moog Constant Rate coil springs return your vehicle to the original specifications. The rate at which the spring compresses and rebounds remains constant regardless of the amount of load on the spring. These coil springs are heat treated, have a weather resistant finish and use a urethane protective tube.

Moog Universal Coil Springs Bar Diameter
Moog Universal Coil Springs Bar Diameter

Variable Rate

Moog Variable Rate coil springs can be used as an original replacement or an upgrade to carry heavier loads. The resistance changes as the spring compresses, becoming progressively stiffer as the load on the springs increase. The springs include a "comfort range" with tightly spaced coils to give a smooth ride, and include a "load range" with widely spaced coils to minimize deflection and maintain chassis height when the vehicle load increases.

Fitment for moog-7226s
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
DodgeB3001978Front Quantity 1
DodgeB3501994-1981Front Quantity 1
DodgeB35001996-1995Front Quantity 1
DodgeCB3001979Front Quantity 1
DodgeD2001980-1975Front Quantity 1
DodgeD200 Pickup1974-1971Front Quantity 1
DodgeD2501993-1989Front Quantity 1 5.2L V8 5211cc/318cid
DodgeD2501993-1989Front Quantity 1 5.9L L6 359cid
DodgeD2501993-1989Front Quantity 1 5.9L V8 360cid
DodgeD2501982-1981Front Quantity 1
DodgeD3001980-1975Front Quantity 1
DodgeD300 Pickup1974-1971Front Quantity 1
DodgeD3501993-1989Front Quantity 1 5.9L V8 360cid
DodgeD3501988-1981Front Quantity 1
FargoD200 Pickup1972-1971Front Quantity 1
PlymouthPB3001980-1978Front Quantity 1
PlymouthPB3501983-1981Front Quantity 1

question_answer Customer Questions and Answers


Question:
What are the specs of part 7226s?
Answer:
Specs are: ID = 4.00 in Bar Diameter = 0.90 in Spring Rate = 1133.00 lbs per inch Load= 2224.00 lbs Installation Height = 13.12 in Free Height = 15.09 in

Question:
Will the 7226s springs work on my 1990 dodge diesel d350?
Answer:
No, it will not fit for the Diesel only gas models. For the diesel you have two options: part 5716 Heavy Duty https://www.moog-suspension-parts.com/moog-5716 or part 5716S Severe Duty https://www.moog-suspension-parts.com/moog-5716s Both are fitt ted for your vehicle. ...see more

Question:
Will the moog-7226s fit on my 86 Dodge Class B motor home?
Answer:
Unfortunately Moog does not offer springs fitted directly for Motor homes.