moog-515096 | Front Wheel Hub Assembly | 07-14 Cadillac Escalde AWD

  • moog-515096 Front Wheel Bearing and Hub Assembly
  • moog-515096 Front Wheel Bearing and Hub Assembly

Front Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-515096
Price: $215.36

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Wheel Bearing and Hub Assembly moog-515096 fits these vehicles:
Details

moog-515096 | Front Wheel Hub Assembly | 07-14 Cadillac Escalde AWD

Premium Moog Wheel Bearing and Hub Assembly
A complete wheel bearing and hub assembly that provides a simple, fast, cost efficient replacement of your old worn wheel bearings.

Front Position
Fits 2014 Chevrolet Tahoe RWD Police model only.
  • For Non-police models for 2014 Chevrolet Tahoe RWD use 515097 instead.
Fits 2007 GMC Sierra 1500 4wd SLE, SLT, WT, and Denali models only.

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly
Fitment for moog-515096
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
CadillacEscalade2014-2007FrontAWD Quantity 2
CadillacEscalade ESV2014-2007FrontAWD Quantity 2
CadillacEscalade EXT2013-2007Front Quantity 2
ChevroletAvalanche2013-2007Front4WD Quantity 2
ChevroletSilverado 15002013-2007Front4WD Quantity 2
ChevroletSuburban 15002014-2007Front4WD Quantity 2
ChevroletTahoe2014-2007Front4WD Quantity 2
ChevroletTahoe2014FrontRWD Quantity 2
GMCSierra 15002013-2007Front4WD Quantity 2
GMCSierra 15002013-2007FrontAWD Quantity 2
GMCYukon2014-2007Front4WD Quantity 2
GMCYukon2014-2007FrontAWD Quantity 2
GMCYukon XL 15002014-2007Front4WD Quantity 2
GMCYukon XL 15002013-2007FrontAWD Quantity 2

question_answer Customer Questions and Answers


Question:
Will part number 515096 fit my 2014 Cadillac Escalade esv AWD?
Answer:
Yes, part number 515096 will fit the 2014 Cadillac Escalade esv AWD.

Question:
What is the warranty for the moog-515096 ?
Answer:
We offer a three year warranty on Moog hub assemblies, that are purchased through our site / company. We can not warranty parts that where purchased from another dealer.

Question:
Is this bearing #515096 made in the USA?
Answer:
Sadly this question isnít as easy to answer as it used to be. Back in the golden years, Moog chassis parts were manufactured solely in the USA, and in a lot of cases, people still assume that today. But as the years have gone on we have seen more and d more Moog parts from one country after another. ...see more

Question:
Does part number 515096 fit a 2007 gmc sierra 1500 4wd SLT?
Answer:
Yes, part number moog-515096 is fitted for a 2007 GMC Sierra 1500.

Question:
Where is part number 515096 manufactured?
Answer:
Moog manufactures their parts all over the world. There is not one specific location as to where each part is made. You can checkout our blog explaining this at https://www.suspension.com/blog/where-are-moog-parts-made/

Question:
I purchased part number 515096 through Amazon and now my hub has gone bad. I know it has a 3 year warranty, so I just need to know how I go about getting my hub replaced?
Answer:
You will need to go back through Amazon to get your warranty replacement. Moog requires customers to get their warranty replacement through who they originally purchased the part through.

Question:
Where was part number 515096 manufactured?
Answer:
Moog manufactures their parts all over the world. There is not one specific location as to where each part is made. You can checkout our blog explaining this at https://www.suspension.com/blog/where-are-moog-parts-made/

Question:
I just installed 2 Moog 515096 Wheel Bearing and Hub Assemblys on my 2007 chevy Tahoe. After completing the work and taking a test drive I have a number of warning lights on my display. Service stabilitrac, ABS, Traction control off? Why arent these parts working with my vehicle computer? How can this be resolved?
Answer:
When replacing hub assemblies with ABS and all of the other traction assists modern vehicles have you have to reset the computer. You have 2 choices: 1) take the negative battery cable of for at least 20 seconds. This will set all of the processors b back to factory programming. Just like when it is new. You will lose all the radio presets. May effect fuel mileage and other perimeters the computer has learned. 2) You will have to take it to a shop and have them clear and reset the computer with a scanner, not a code reader. This is not unusual for this to happen. Your vehicle should not set a code again after doing the resets. When ever the ABS light is on it deactivates the ABS and any of the other driving assists you truck has. ...see more