MOOG 514G U-Joint

  • moog-514g U-Joint
  • moog-514g U-Joint

U-Joint

Manufacturer: MOOG
Part Number: moog-514g
Price: $26.96

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

Details
AMC Classic 64-65
Ford Falcon 60-68
Mustang 64-69
Holden 48-86
Jeep 67-71
Mercury Comet 60-65
Opel 51-66

Moog's u-joints are precision-ground to the strictest of tolerances, with quality-control inspection at every step in manufacturing.

Moog Universal Joints

The ultimate drivetrain addition

DST would like to introduce you to the ultimate drivetrain addition. Machined to meet or exceed original equipment standards, Moog premium universal joints are another addition to Moog's total undercar solutions. Moog's u-joints are precision-ground to the strictest of tolerances, with quality-control inspection at every step in manufacturing.

Moog universal joints
Moog universal joints

Problem solver technology

Moog's u-joints feature bearing cups that are cold-formed and case-hardened, providing for better strength and less wear than O.E. The superior quality seals are charged with keeping harmful road contaminants out and keeping the proper lubrication on the u-joint.

Long lasting life

These driveline components are equipped with high strength steel crosses to exceed OE specifications, and are carburized heat-treated to ensure long life. Moog includes a zerk grease fitting in the cross body for easy maintenance. The bearing cups feature a 360 degree radial design to allow even lubricant distribution to the bearing surface. Also featured are needle bearings, providing maximum load-carrying capabilities.

Moog universal joints
Moog universal joints

Lifetime warranty

Moog backs their u-joints with a lifetime warranty, which can be handled directly through our DST customer service team. If you have any other questions be sure to give us a call.

Fitment for moog-514g
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
American MotorsAmerican1966At Rear Axle Quantity 1 3.3L L6 3261cc/199cid
American MotorsAmerican1966At Transmission Quantity 1 3.3L L6 3261cc/199cid
American MotorsAmerican1965At Rear Axle Quantity 1 3.2L L6 3206cc/196cid
American MotorsAmerican1965At Transmission Quantity 1 3.2L L6 3206cc/196cid
American MotorsAmerican1964At Rear Axle Quantity 1
American MotorsAmerican1964At Transmission Quantity 1
American MotorsClassic1965At Transmission Quantity 1 3.3L L6 3261cc/199cid
American MotorsClassic1964At Transmission Quantity 1 3.2L L6 3206cc/196cid
American MotorsClassic1964At Transmission Quantity 1 3.8L L6 3802cc/232cid
FordFalcon1964-1963At Rear Axle Quantity 1 2.4L L6 144cid
FordFalcon1964-1963At Rear Axle Quantity 1 2.4L L6 2360cc/144cid
FordFalcon1964-1963At Rear Axle Quantity 1 2.8L L6 170cid
FordFalcon1964-1963At Rear Axle Quantity 1 2.8L L6 2786cc/170cid
FordFalcon1964-1963At Transmission Quantity 1 2.4L L6 144cid
FordFalcon1964-1963At Transmission Quantity 1 2.4L L6 2360cc/144cid
FordFalcon1964-1963At Transmission Quantity 1 2.8L L6 170cid
FordFalcon1964-1963At Transmission Quantity 1 2.8L L6 2786cc/170cid
FordFalcon1962-1960At Rear Axle Quantity 1
FordFalcon1962-1960At Transmission Quantity 1
FordMustang1967-1965At Rear Axle Quantity 1 3.3L L6 3277cc/200cid
FordMustang1967-1965At Transmission Quantity 1 3.3L L6 3277cc/200cid
FordMustang1965-1964At Rear Axle Quantity 1 2.8L L6 2786cc/170cid
FordMustang1965-1964At Transmission Quantity 1 2.8L L6 2786cc/170cid
FordP-1001967-1965At Rear Axle Quantity 1
FordP-1001967-1965At Transmission Quantity 1
MercuryCaliente1964At Rear Axle Quantity 1 3.3L L6 3277cc/200cid
MercuryCaliente1964At Transmission Quantity 1 3.3L L6 3277cc/200cid
MercuryComet1965-1960At Rear Axle Quantity 1
MercuryComet1965-1960At Transmission Quantity 1
MercuryComet1964-1963At Rear Axle Quantity 1 2.8L L6 2786cc/170cid
MercuryComet1964-1963At Transmission Quantity 1 2.8L L6 2786cc/170cid
MercuryComet1964At Rear Axle Quantity 1 2.8L L6 170cid
MercuryComet1964At Rear Axle Quantity 1 3.3L L6 3277cc/200cid
MercuryComet1964At Transmission Quantity 1 2.8L L6 170cid
MercuryComet1964At Transmission Quantity 1 3.3L L6 3277cc/200cid
MercuryComet1963At Rear Axle Quantity 1 2.4L L6 144cid
MercuryComet1963At Rear Axle Quantity 1 2.4L L6 2360cc/144cid
MercuryComet1963At Transmission Quantity 1 2.4L L6 144cid
MercuryComet1963At Transmission Quantity 1 2.4L L6 2360cc/144cid
MercuryCyclone1965At Rear Axle Quantity 1
MercuryCyclone1965At Transmission Quantity 1

question_answer Customer Questions and Answers


Question:
I lost one of my clips from part number 514g, am I able to purchase just a clip without having to buy another U-joint?
Answer:
No, Moog does not sell the clips separately from the U-joints.

Question:
The size diameter of the bearing of 514G, full-length.
Answer:
The dimensions listed for moog-514g ujoint shown in the Moog online catalog: Length Axis 1 (MM) 38.811 Length Axis 1 (IN) 1.528 Length Axis 2 (IN) 1.528 Length Axis 2 (MM) 38.811 Bearing Cap Type 4 Grooved Round Bearings Greaseable YES Bearing Cap Axis 2 Diameter (IN) 1 Bearing Cap Axis 2 Diameter (MM) 25.4 Bearing Cap Axis 1 Diameter (IN) 1 Bearing Cap Axis 1 Diameter (MM) 25.4 ...see more