moog-513224 | Front Wheel Hub Assembly | 2005-2014 Chrysler 300 RWD

  • moog-513224 360image 1
  • moog-513224 Front Wheel Bearing and Hub Assembly
  • moog-513224 Front Wheel Bearing and Hub Assembly
  • moog-513224 Front Wheel Bearing and Hub Assembly
  • moog-513224 Front Wheel Bearing and Hub Assembly
  • moog-513224 360image large 1

Front Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-513224
Price: $155.42

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Wheel Bearing and Hub Assembly moog-513224 fits these vehicles:
Details

moog-513224 | Front Wheel Hub Assembly | 2005-2014 Chrysler 300 RWD

2005-2010 Chrysler 300
  • Fits RWD vehicles with 2.7L V6, 3.5L V8, 5.7L V8, and 6.1L V8
  • For AWD vehicles with 3.5L V6 and 5.7L V8 use 513225
2011 Chrysler 300
  • Fits RWD vehicles with 3.6L V6 and 5.7L V8
  • For AWD vehicles with 5.7L V8 use 513225
2012 Chrysler 300
  • Fits RWD submodel: S with 3.6L V6 and performance brakes
  • Fits RWD vehicles with 5.7L V8 with performance brakes
  • Fits RWD vehicles with 6.4L V8
  • For RWD submodels: Base, Limited, and S with 3.6L V6 and without Performance Brakes use 513325
  • For RWD vehicles with 5.7L V8 without performance brakes use 513325
  • For AWD vehicles with 3.6L V6 and 5.7L V8 use 513225
2013-2014 Chrysler 300
  • Fits RWD vehicles with 6.4L V8
  • For RWD vehicles with 3.6L V6 and 5.7L V8 use 513325
  • For AWD vehicles with 3.6L V6 and 5.7L V8 use 513325
2012-2014 Dodge Challenger
  • Fits vehicles with 6.4L V8
  • For vehicles with 5.7L V8 and 3.6L V6 use 513325
2006-2011 Dodge Charger
  • Fits RWD vehicles ONLY
  • For AWD vehicles with 4 bolt flange use 513225
2012-2014 Dodge Charger
  • Fits submodel: SRT8
  • For AWD submodels: R/T, SXT, and SXT Plus with 4 bolt flange use 513225
  • For RWD submodels: R/T, SE, SXT, and SXT Plus use513325
2005-2008 Dodge Magnum
  • Fits RWD vehicles
  • For AWD vehicles use 513225

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly
Fitment for moog-513224
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Chrysler3002014-2012FrontRWD Quantity 2 6.4L V8 6424cc/392cid
Chrysler3002012-2011FrontRWD Quantity 2 3.6L V6 3604cc/220cid
Chrysler3002012-2005FrontRWD Quantity 2 5.7L V8 345cid
Chrysler3002010-2005FrontRWD Quantity 2 2.7L V6 2700cc/167cid
Chrysler3002010-2005FrontRWD Quantity 2 2.7L V6 2736cc/167cid
Chrysler3002010-2005FrontRWD Quantity 2 3.5L V6 3497cc/215cid
Chrysler3002010-2005FrontRWD Quantity 2 6.1L V8 6059cc/370cid
DodgeChallenger2014-2012Front Quantity 2 6.4L V8 6424cc/392cid
DodgeChallenger2011-2008Front Quantity 2
DodgeCharger2014-2012Front Quantity 2
DodgeCharger2011-2006FrontRWD Quantity 2
DodgeMagnum2008-2005FrontRWD Quantity 2

question_answer Customer Questions and Answers


Question:
I'm replacing my driver side wheel assembly hub and I was wonder if I need grease during the install and if so what brand or type do you recommend?
Answer:
Moog-513224 is greased after it is assembled and sealed. No further maintenance needed.

Question:
Does part number Moog-513224 need to be greased prior to installation?
Answer:
No, part number Moog-513224 does not need to be greased. It is sealed and will not require any grease applications.

Question:
How many studs does part number Moog-513224 have?
Answer:
Part number Moog-513224 has 5 studs.

Question:
Does part number Moog-513224 fit my 2013 Chrysler 300 RWD?
Answer:
Yes part number Moog-513224 is fitted for the 2013 Chrysler 300 RWD with the 6.4 V8. .

Question:
Is part number Moog-513224 a bolt-on or pressed application?
Answer:
Part number Moog-513224 is a press-in solution.