Rear Coil Springs - Jeep Wrangler TJ - MOOG moog-3229

  • moog-3229 Rear Coil Springs - Pair

Rear Coil Springs - Pair

Manufacturer: MOOG
Part Number: moog-3229
Price: $108.88

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentRear Coil Springs - Pair moog-3229 fits these vehicles:
Details

Rear Coil Springs - Jeep Wrangler TJ - MOOG moog-3229

Constant Rate Spring Set

Fits 1997-2003 Jeep TJ 2.5L L4
Fits 1997-2002 Jeep TJ Sahara 4.0L L6
Fits 1997-2003 Jeep TJ Sport 4.0L L6
Fits 2003 Jeep TJ Sahara 4.0L L6 Automatic Transmission
Fits 2004 Jeep TJ Sahara 4.0L L6 Standard Transmission
Fits 2004 Jeep TJ Sport 4.0L L6 Standard Transmission
Fits 2005 Jeep TJ Sport 4.0L L6

Fits 1997-2002 Jeep Wrangler SE 2.5L L4
Fits 1997-2002 Jeep Wrangler Sahara 4.0L L6
Fits 1997-2002 Jeep Wrangler Sport 4.0L L6
Fits 2002-2004 Jeep Wrangler X with Air Conditioning
Fits 2003-2004 Jeep Wrangler SE 2.4L L4
Fits 2003 Jeep Wrangler X
Fits 2003 Jeep Wrangler Sahara 4.0L L6 Automatic Transmission
Fits 2004 Jeep Wrangler Sahara 4.0L L6 Standard Transmission
Fits 2004 Jeep Wrangler Sport 4.0L L6 Standard Transmission
Fits 2005-2006 Jeep Wrangler Sport
Fits 2005-2006 Jeep Wrangler X

Moog's Coil Springs

Designed to be more than OE replacements, Moog's coil springs come with a variety of shapes and ends. This selection, combined with Moog's lifetime warranty handled right here at DST, lends security to whichever choice you might make. While they are certainly higher quality than the OE springs, each of Moog's coil springs were designed to still have the same spring rate. Having the same spring rate allows for an easier install and a more accurate restoration for your vehicle's ride.

End Type

Coil Springs have three types of ends: Square, Tangential and Pigtail. It is important that you select a coil spring that matches BOTH your end types, otherwise the coil spring won't fit. Your OE coil spring could have the same type ends, or a combination of both.

Moog Universal Coil Springs Squared

Type 1: Squared

With a Squared end, the final coil is bent back to touch the coil before it. The easiest way to know if you have a squared end is to stand the coil spring straight up. A squared end will let the spring sit flat on the ground and stay standing.

Type 2: Tangential

A Tangential end looks like it would just keep on going forever if the spring continued. The last coil is not bent back and it is not the pigtail (see below). Instead, the tangential coil spring looks as though a normal coil was just cut, otherwise, it would have kept winding on forever. If you tried to stand it up straight, it would fall.

Moog Universal Coil Springs Squared
Moog Universal Coil Springs Squared

Type 3: Pigtail

The Pigtail is probably the easiest to identify. Its defining characteristic is the pig tail shape at the end. The final coil is squared off, but is a much smaller diameter than the rest of the spring.

Spring Type

Moog offers two types of springs for a universal fitment: Constant Rate and Variable Rate.

Constant Rate

Moog Constant Rate coil springs return your vehicle to the original specifications. The rate at which the spring compresses and rebounds remains constant regardless of the amount of load on the spring. These coil springs are heat treated, have a weather resistant finish and use a urethane protective tube.

Moog Universal Coil Springs Bar Diameter
Moog Universal Coil Springs Bar Diameter

Variable Rate

Moog Variable Rate coil springs can be used as an original replacement or an upgrade to carry heavier loads. The resistance changes as the spring compresses, becoming progressively stiffer as the load on the springs increase. The springs include a "comfort range" with tightly spaced coils to give a smooth ride, and include a "load range" with widely spaced coils to minimize deflection and maintain chassis height when the vehicle load increases.

MOOG moog-3229

Product Reviews for Rear Coil Springs - Jeep Wrangler TJ - MOOG moog-3229

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-3229

5 out of 5 based on 1 user reviews. Write a Review

S
verified_user

starstarstarstarstar" Good "

Excellent service. Product is as described and working great.

verified_user Verified Buyer - - . MOOG moog-3229 - 5 out of 5
Fitment for moog-3229
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
JeepTJ2005-1997Rear Quantity 1 4.0L L6 242cid
JeepTJ2003Rear Quantity 1 2.4L L4 148cid
JeepTJ2002-1997Rear Quantity 1 2.5L L4 150cid
JeepWrangler2006-2002Rear Quantity 1
JeepWrangler2004-2003Rear Quantity 1 2.4L L4 148cid
JeepWrangler2004-1997Rear Quantity 1 4.0L L6 242cid
JeepWrangler2002-1997Rear Quantity 1 2.5L L4 150cid

question_answer Customer Questions and Answers


Question:
What is the installation height of part number 3229?
Answer:
The part 3229 is fitted for a 01 Jeep Wrangler SE or Sport or Sahara. Should have the installation height of 8.00 in which will put it back up to OEM height. Unless you had a lift on your vehicle or received a miss-pack. if you have a miss-pack you w will need to go back to the dealer you purchased parts from to get a replacement. If you had a lift then yes, springs will be changed to sit at OEM stock height only. ...see more