Front Upper Ball Joint | Dodge, Chrysley and Plymouth

  • moog-k772 360image 1
  • moog-k772 Front Upper Ball Joint
  • moog-k772 Front Upper Ball Joint
  • moog-k772 Front Upper Ball Joint
  • moog-k772 Front Upper Ball Joint
  • moog-k772 360image large 1

Front Upper Ball Joint

Manufacturer: MOOG
Part Number: moog-k772
Price: $41.84

check_box In Stock check_box Ships Immediately


Suggested part for moog-k772: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k772: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Upper Ball Joint moog-k772 fits these vehicles:
Details

Front Upper Ball Joint | Dodge, Chrysley and Plymouth

Fits Left or Right Side

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint

Warranty

Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

MOOG moog-k772

Product Reviews for Front Upper Ball Joint | Dodge, Chrysley and Plymouth

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k772

5 out of 5 based on 2 user reviews. Write a Review

D
verified_user

starstarstarstarstar" Moog parts has always been the best "

Fit as should.

verified_user Verified Buyer - Donald Colaluca - . MOOG moog-k772 - 5 out of 5
G
verified_user

starstarstarstarstar" Great product! "

This ball joint made a difference I was not expecting. I would highly recommend!

verified_user Verified Buyer - Gordon Wagner - . MOOG moog-k772 - 5 out of 5
Fitment for moog-k772
YearsMakeModelSubModelPositionEngine BaseNotes
1962 - 1971Chrysler300Front Upper
1975 - 1983ChryslerCordobaFront Upper
1983 - 1989ChryslerFifth AvenueFront Upper
1981 - 1983ChryslerImperialFront Upper
1977 - 1981ChryslerLeBaronFront Upper
1963 - 1973, 1979 - 1982ChryslerNew YorkerFront Upper
1961 - 1973, 1979 - 1981ChryslerNewportFront Upper
1958ChryslerTown & CountryFront Upper5.8L V8
1959 - 1960ChryslerTown & CountryFront Upper6.3L V8
1961 - 1962ChryslerTown & CountryFront Upper5.9L V8
1963 - 1964ChryslerTown & CountryFront Upper5.9L V8, 6.7L V8
1965ChryslerTown & CountryFront Upper6.7L V8
1966 - 1973, 1978 - 1981ChryslerTown & CountryFront Upper
1958 - 1961ChryslerWindsorFront Upper
1960DeSotoAdventurerFront Upper
1961DeSotoDeSotoFront Upper
1960DeSotoFirefliteFront Upper
1957 - 1959DeSotoFiresweepFront Upper
1963 - 1964Dodge330Front Upper
1963 - 1964Dodge440Front Upper
1962 - 1964Dodge880Front Upper
1964DodgeA100 TruckFront Upper
1964DodgeA100Front Upper
1976 - 1980DodgeAspenFront Upper
1970 - 1974DodgeChallengerFront Upper
1966 - 1978DodgeChargerFront Upper
1957 - 1959, 1965 - 1976DodgeCoronetFront Upper
1957 - 1959DodgeCustomFront Upper
1960 - 1962, 1973 - 1976DodgeDartFront Upper
1977 - 1989DodgeDiplomatFront Upper
1957 - 1959DodgeLancerFront Upper
1978 - 1979DodgeMagnumFront Upper
1960DodgeMatadorFront Upper
1980 - 1983DodgeMiradaFront Upper
1966 - 1973, 1977 - 1978DodgeMonacoFront Upper
1960 - 1964, 1969 - 1973DodgePolaraFront Upper
1965 - 1968DodgePolaraFront Upperwith Drum Brakes
1960 - 1961DodgeSenecaFront Upper
1959DodgeSierraCustomFront Upper
1979 - 1981DodgeSt. RegisFront Upper
1957 - 1958DodgeSuburbanFront Upper
1970 - 1974PlymouthBarracudaFront Upper
1965 - 1967PlymouthBelvedere IIFront Upper
1957 - 1970PlymouthBelvedereFront Upper
1970 - 1974PlymouthCudaFront Upper
1973 - 1976PlymouthDusterFront Upper
1962 - 1963PlymouthFleet SpecialFront Upper
1968 - 1973PlymouthFury IFront Upper
1965 - 1973PlymouthFury IIFront Upper
1965 - 1973PlymouthFury IIIFront Upper
1957 - 1971, 1973, 1975 - 1978PlymouthFuryFront Upper
1972PlymouthFuryCustom Suburban, Gran Coupe, Gran Sedan, Sport Suburban, SuburbanFront Upper
1972 - 1973, 1980 - 1989PlymouthGran FuryFront Upper
1967 - 1971PlymouthGTXFront Upper
1957 - 1958PlymouthPlazaFront Upper
1968 - 1975PlymouthRoad RunnerFront Upper
1965 - 1974PlymouthSatelliteFront Upper
1957 - 1964PlymouthSavoyFront Upper
1973 - 1976PlymouthScampFront Upper
1957 - 1961PlymouthSuburbanFront Upper
1970PlymouthSuperbirdFront Upper
1973 - 1976PlymouthValiantFront Upper
1976 - 1980PlymouthVolareFront Upper

Canada Market Only (vehicles not sold in USA):

YearsMakeModelPositionNotes
1964FargoA100 VanFront Upper
1978 - 1984PlymouthCaravelleFront Upper
1989PlymouthCaravelleFront UpperVehicles Built For Canadian Market
Overview
GradePremium
Features
AdjustableNo
GreaseableYes
Materials, color & finish
MaterialNeoprene
What's included
Mounting Hardware IncludedYes
OEM part numbers MOOG K772 replaces

MOOG K772 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
Chrysler2298534

question_answer Customer Questions and Answers


Question:
What is the difference between the ball joints K772, K778, K719, and K727 lower early Chrysler parts?
Answer:
Differences are: K772 6.3L front upper Height = 3.550 in Outer Diameter = 1.900 in Length = 3.550 in K778 6.7L front uppers https://www.suspension.com/moog-k778 Height = 4.560 in Outer Diameter = 2.020 in Length = 4.560 K719 6.3L front lower https://www.suspension.com/moog-k719 Height = 3.790 in Outer Diameter = 2.120 in Length = 3.790 in K727 6.7L front lowers https://www.suspension.com/moog-k7271 Height = 3.920 in Outer Diameter = 2.310 in Inner Diameter = 2.010 in Length = 3.920 in ...see more

Question:
Is the moog-k772 the same as the moog-k727? Can they be interchangeable?
Answer:
The moog-k772 and the moog-k727 are not the same and are not interchangeable. The moog-k727 is a little big bigger than the moog-k772.

Question:
What is the difference between part numbers K772 and K704?
Answer:
Part number K772 has a stud thread of .562-18 and includes new washers and part number K704 has a stud thread of .437-20 and does not include the washers.

Question:
Where can I get just the dust boots for part number k772?
Answer:
Moog does not offer the dust boots. You can find the dust boots at https://www.suspension.com/universal-dust-boots.asp

Question:
Do you sell the tie rod end boots separately from the tie rod ends?
Answer:
Moog does not sell just the dust boot. We offer universal polyurethane dust boots that are sold by dimensions. Here is a link to them: https://www.suspension.com/universal-dust-boots.asp. Put this link in a Google or Yahoo search and it should displa ay. ...see more

Question:
Are k772 ball joints pressed in or screwed in?
Answer:
moog-k772 is a screw in ball joint.

Question:
Looking for K772 ball joint dust cover.
Answer:
Moog does not offer just the dust boots. I have universal polyurethane dust boots sold by dimensions. Put this link in a Google or Yahoo search: https://www.suspension.com/universal-dust-boots.asp. It will show the link.

Question:
Just looking for the boots for K772.
Answer:
Moog does not offer the dust boots. I have universal polyurethane dust boots sold by dimensions. Put this link in a Google or Yahoo search: https://www.suspension.com/universal-dust-boots.asp. This will help with the dimensions from your dust boots.

Question:
What specifications can you provide for the moog-k772?
Answer:
The moog-k772 will have a Height of 3.55

Question:
Do you have the installation instructions for the k772? I dont know where the washer goes.
Answer:
You can find the instructions for part number k772 at https://fme-cat.com/livedocs/AXCF2619.pdf. The washer will go right under the cotter pin.

Question:
What is the stud thread size on part number k772?
Answer:
On part number k772, the stud thread is .562-18.

Question:
Do you sell just the dust boots for part number K772?
Answer:
No, Moog does not sell their dust boots separately from the ball joints. However, we do have polyurethane options available at https://www.suspension.com/universal-dust-boots.asp

Question:
Does this have a dust boot?
Answer:
Yes, part number moog-k772 does come with a dust boot.

Question:
Are part numbers k772 and k719 available with the integral dust boots?
Answer:
No, neither the k772 or the k719 have the integral dust boot.

Question:
Where does the washer go on part number k772?
Answer:
For part number k772, the washer will go on right under the castle nut.