moog-rk620128 | Front Lower Control Arm and Ball Joint | 07-13 BMW 328i

  • moog-rk620128 Front Lower Control Arm And Ball Joint - Front Position Passenger Side
  • moog-rk620128 Front Lower Control Arm And Ball Joint - Front Position Passenger Side

Front Lower Control Arm And Ball Joint - Front Position Passenger Side

Manufacturer: MOOG
Part Number: moog-rk620128
Price: $96.49

check_box In Stock check_box Ships Immediately


Suggested part for moog-rk620128: moog-rk620127
moog-rk620127 Front Lower Control Arm And Ball Joint - Front Position Driver Side
Front Lower Control Arm And Ball Joint - Front Position Driver Side

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-rk620128 to beckarnley-102-7067
Beck Arnley beckarnley-102-7067
. Standard OE replacement.
Price: $99.18
Warranty: 3 Years or 50000 Miles

question_answer Ask us a Question

FitmentFront Lower Control Arm And Ball Joint - Front Position Passenger Side moog-rk620128 fits these vehicles:
Details

moog-rk620128 | Front Lower Control Arm and Ball Joint | 07-13 BMW 328i

Fits Front Right Lower Forward Position
  • BMW 328i 2013-2012 RWD Fits 3.0L L6 2979cc
  • BMW 328i 2013-2012 RWD Fits 3.0L L6 2996cc
2009-2011 BMW 328i
  • Fits RWD models ONLY
2012-2013 BMW 328i 2009-2011 BMW 335i
  • Fits RWD models ONLY
2012-2013 BMW 335i
  • Fits RWD 2 door coupe
  • Fits 2 door convertible
2013-2014 BMW X1
  • Fits RWD models ONLY

For the driver side use rk620127.

For the rear position use rk620130.

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-rk620128
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
BMW128i2013-2008Front Right Lower Forward Quantity 1
BMW135i2013-2008Front Right Lower Forward Quantity 1
BMW323i2010-2006Front Right Lower Forward Quantity 1
BMW325i2006Front Right Lower Forward Quantity 1
BMW328i2013-2012Front Right Lower ForwardRWD Quantity 1 3.0L L6 2996cc
BMW328i2011-2009Front Right Lower ForwardRWD Quantity 1
BMW328i2008-2007Front Right Lower Forward Quantity 1
BMW330i2006Front Right Lower Forward Quantity 1
BMW335d2011-2009Front Right Lower Forward Quantity 1
BMW335i2013-2009Front Right Lower ForwardRWD Quantity 1
BMW335i2013-2007Front Right Lower Forward Quantity 1
BMW335is2013-2011Front Right Lower Forward Quantity 1
BMWX12014-2013Front Right Lower ForwardRWD Quantity 1
BMWZ42016-2009Front Right Lower Forward Quantity 1