moog-k201619 | 26.92mm Front Sway Bar Bushings | '03-'07 Honda Accord

  • moog-k201619 360image 1
  • moog-k201619 Front Sway Bar Bushings
  • moog-k201619 Front Sway Bar Bushings
  • moog-k201619 Front Sway Bar Bushings
  • moog-k201619 Front Sway Bar Bushings
  • moog-k201619 Front Sway Bar Bushings
  • moog-k201619 360image large 1

Front Sway Bar Bushings

Manufacturer: MOOG
Part Number: moog-k201619
Price: $17.92

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Sway Bar Bushings moog-k201619 fits these vehicles:

moog-k201619 | 26.92mm Front Sway Bar Bushings | '03-'07 Honda Accord

26.92mm Front Sway Bar Bushings with Synthetic Fabric Lining 07-09 Acura MDX | 03-07 Honda Accord | 99-09 Honda Odyssey

These 26.92mm (1.06in) Front Sway Bar Bushings fit the 07-09 Acura MDX, 04-06 TL, 04-08 TSX and the 03-07 Honda Accord and 99-09 Odyssey. The synthetic fabric lined inner diameter of these front sway bar bushings will last longer than the original equipment (OE) sway bar bushings and eliminate the squeaking that comes with age and wear. These durable bushings will continue to provide a stable grip on your sway bar long after OE bushings would have worn down, meaning better handling in a turn.

27mm front sway bar bushings 03-07 honda accord
worn inner diameter sway bar bushings

Worn Sway Bar Bushings

The front sway bar connects the driver and passenger sides of your Honda or Acura and keeps the wheels well connected to the pavement during a quick turn. When the OE bushings wear down the sway bar isn't held securely and your inside wheel can lose some contact, and traction, during a turn. The rubber that makes up most OE bushings has a short lifespan compared to the rest of your vehicle, especially if you carry several passengers in your Odyssey or occasionally have to take you those rough Erath county back roads in your Accord.

A Tough Bushing Solution

When the OE bushings wear down the sway bar isn't held securely and your inside wheel can lose some contact, and traction while turning. This is caused by the sway bar mashing further into the worn bushings than they used to or the bushings hollowing out enough that there is a gap between the bar and the bushing. A worn sway bar bushing can also produce an annoying squeaking any time you hit a little bump in the road or take a hard turn. If you're already experiencing some noise or traction loss in a turn then Moog has a great solution with their 26.92mm front sway bar bushings with PTFE synthetic fabric lining.

synthetic fabric lined 27mm sway bar bushings acura mdx
99-09 honda odyssey front sway bar bushings from moog

Long Lasting Performance

The new synthetic fabric lining creates a tough barrier of PTFE between the sway bar and the rubber of the sway bar bushings, reducing the wear that the metal bar has on soft rubber. This allows these front sway bar bushings to last 3 times longer than the OE bushings, meaning this might be the last replacement you'll ever have to buy. More durability means these bushings hold the sway bar in place longer, giving you better-turning performance and less body roll. The lining also eliminates the annoying squeaking that can develop as OE bushings age.

Moog's Problem Solver sway bar bushings are split along the side for an easy install that can be completed in your own garage or driveway with a simple socket set. Merely remove the bracket and OE bushing, slip the new sway bar bushing over the bar, and bolt the bracket back down. If you do happen to have any issues with these bushings Suspension.com will handle the warranty for you in-house to save you any hassle.