moog-k201177 | 33.3mm Front Sway Bar Bushings | 99-06 Silverado 1500

  • moog-k201177 360image 1
  • moog-k201177 Front Sway Bar Bushing Kit - 1-5/16in
  • moog-k201177 Front Sway Bar Bushing Kit - 1-5/16in
  • moog-k201177 Front Sway Bar Bushing Kit - 1-5/16in
  • moog-k201177 Front Sway Bar Bushing Kit - 1-5/16in
  • moog-k201177 Front Sway Bar Bushing Kit - 1-5/16in
  • moog-k201177 360image large 1

Front Sway Bar Bushing Kit - 1-5/16in

Manufacturer: MOOG
Part Number: moog-k201177
Price: $18.22

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Sway Bar Bushing Kit - 1-5/16in moog-k201177 fits these vehicles:

moog-k201177 | 33.3mm Front Sway Bar Bushings | 99-06 Silverado 1500

33.3mm Front Sway Bar Bushings 1999-2006 Silverado 1500

Moog's Problem Solver Sway Bar Bushings with Synthetic Fabric Liner will replace the worn or squeaky sway bar bushings on several Chevy pickups and SUVs and the 2002-2006 Cadillac Escalade. These bushings have a synthetic lined inner diameter which eliminates the need for grease and extends the life of the part over the original.

*Some of the vehicles in these year models have a smaller sway bar that requires 31.75mm, 30.16mm or 28.57mm front sway bar bushings, so it's advised that you measure your sway bar before purchasing your bushings.

33.3mm front sway bar bushings for chevy
worn chevy sway bar bushing

Original Bushings

If you've noticed your Chevy truck or SUV isn't handling well when taking a corner and the body is rolling to the outside then your sway bar bushings may be worn down. The sway bar connects the wheels on the driver's and passenger's side, keeping both tires on the ground during a turn, giving you more traction.

Traction during a turn is important, whether you're hauling the little league team to the field in your '06 Suburban 1500 or a cattle trailer down Hwy 377 in your '08 4WD Silverado 3500, and worn bushings aren't going to cut it. If you want to restore the turning feel and ride quality of your Chevy with a bushing that requires less maintenance and lasts longer than the originals then Moog has the answer for you.

Problem Solver Bushings

Moog's 33.3mm Problem Solver Sway Bar Bushings with a PTFE Synthetic Fabric Lining will restore the turning performance of your Chevy truck or van, but they also last longer than OE bushings thanks to the inner lining. This synthetic fabric allows the sway bar bushing to function without grease, so you don't have to worry about re-lubricating those bushings if you've buried your axles in mud on the back 40 or submerged your undercarriage going through a high water crossing.

This also takes care of the squeaking that the OE rubber bushings can sometimes produce so the bumpy entrance into Stephenville's Hard Eight Barbecue parking lot won't draw everyone's attention.

33mm synthetic fabric lined front sway bar bushings
moog problem solver 33mm sway bar bushing

Lasts 3 Times Longer

Moog calls their parts "Problem Solvers" because they do everything they can to improve the design of the OE bushings that came on your Chevy. In the case of their Synthetic Fabric Lined Sway Bar Bushings the longevity increase over OE bushings is 3 times longer.

Also, besides the quieter operation, these bushings are much more easily installed compared to other replacement options. With the split design, these bushings can be slipped onto the sway bar without having to unbolt it from the suspension. Once on the bar, these bushings will be held in place with the original brackets and you're ready to go.

MOOG moog-k201177

Product Reviews for moog-k201177 | 33.3mm Front Sway Bar Bushings | 99-06 Silverado 1500

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k201177

5 out of 5 based on 2 user reviews. Write a Review

B
verified_user

starstarstarstarstar" Excellent "

Received correct product and installed myself in about 30 minutes. Easy peasey.. Thanks,

verified_user Verified Buyer - - . MOOG moog-k201177 - 5 out of 5
B
verified_user

starstarstarstarstar" Excellent "

Received correct product and installed myself in about 30 minutes. Easy peasey.. Thanks,

verified_user Verified Buyer - - . MOOG moog-k201177 - 5 out of 5
Fitment for moog-k201177