lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Moog Control Arm Bushings
Controlling Comfort and Steering
If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.
Long-Term Performance and Long-Term Coverage
Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.
question_answer Customer Questions and Answers
- Is this part K20044 fitted for a 2003 Chevrolet 2500HD for a welded/stamped upper control arms and forged lower control arms. Do you have lower bushings for my vehicle? What's the difference between the K2000044 and the K6688?
- The differences are: K2000044 Standard Design; Contains Front And Rear Bushings; For Welded Arm Outer Diameter = 1.720 in Inner Diameter = 0.560 in Inner Diameter Bushing 1 = 0.560 in Outer Diameter Bushing 1 = 2.240 in Length Bushing 1 (Inch) )2.120 K6688 Contains Front And Rear Bushings; For Forged Arm Outer Diameter = 1.740 in Inner Diameter = 0.560 in Inner Diameter Bushing = 0.570 in Outer Diameter Bushing = 2.240 in Both are fitted for your vehicle. And Moog does make the lower bushings which are: K6658 https://www.moog-suspension-parts.com/moog-k6658 ...see more