moog-ev800963 | Moog Inner Tie Rod Dodge Challenger | EV800963

  • moog-ev800963 Front Inner Tie Rod
  • moog-ev800963 Front Inner Tie Rod

Front Inner Tie Rod

Manufacturer: MOOG
Part Number: moog-ev800963
Price: $50.86

check_box In Stock check_box Ships Immediately

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Inner Tie Rod moog-ev800963 fits these vehicles:

moog-ev800963 | Moog Inner Tie Rod Dodge Challenger | EV800963

Fits these Chrysler 300 models only:
  • 2011-2014 RWD with 3.6L and 5.7L engines
  • 2012-2014 RWD with 6.4L engine
Fits the Dodge Challenger 2015-2018 with 6.2L engine.

Fits these Dodge Charger models only:
  • 2011-2014 RWD
  • 2015-2018 with 6.2L engine

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

Fitment for moog-ev800963
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
Chrysler3002014-2012InnerRWD Quantity 2 6.4L V8 6424cc/392cid
Chrysler3002014-2011InnerRWD Quantity 2 3.6L V6 3604cc/220cid
Chrysler3002014-2011InnerRWD Quantity 2 5.7L V8 345cid
Chrysler3002013InnerRWD Quantity 2 5.7L V8 5654cc/345cid
DodgeChallenger2018-2015Inner Quantity 2 6.2L V8 6166cc/376cid
DodgeChallenger2014-2011Inner Quantity 2
DodgeCharger2018-2015Inner Quantity 2 6.2L V8 6166cc/376cid
DodgeCharger2014-2011InnerRWD Quantity 2