moog-ck80400 | Front Lower Control Arm Assembly | Ford Escape 04-12

  • moog-ck80400 Discontinued by Moog
  • moog-ck80400 Discontinued by Moog

Discontinued by Moog

Manufacturer: MOOG
Part Number: moog-ck80400
Price: $97.99

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

Cross Reference from moog-ck80400 to moog-ck80398
MOOG moog-ck80398
Rubber.
Price: $117.93
Warranty: 3 Year to Limited Lifetime

FitmentDiscontinued by Moog moog-ck80400 fits these vehicles:
Details

moog-ck80400 | Front Lower Control Arm Assembly | Ford Escape 04-12

Length from Ball joint to rear arm to Frame bushing - 13.5 inches
  • For Length 15.15 inches see ck80398 instead.
  • What is the Difference Between Moog R Series and CK Control Arms?

    CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

    Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

    Moog Stamped Arms
    Moog Stamped Arms

    CK (K): Moog Problem Solver

    Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

    RK: Moog R Series

    The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

    Moog Forged Arms
    Moog Stamped Arms

    Type and Warranty

    Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

    question_answer Customer Questions and Answers


    Question:
    Are the ball joints in part number ck80400 replaceable?
    Answer:
    Yes, the ball joints in part number ck80400 are replaceable.