Front Inner Tie Rod | Cadillac Escalade | EV800084

  • moog-ev800084 360image 1
  • moog-ev800084 Front Inner Tie Rod End
  • moog-ev800084 Front Inner Tie Rod End
  • moog-ev800084 Front Inner Tie Rod End
  • moog-ev800084 Front Inner Tie Rod End
  • moog-ev800084 Front Inner Tie Rod End
  • moog-ev800084 360image large 1

Front Inner Tie Rod End

Manufacturer: MOOG
Part Number: moog-ev800084
Price: $91.18

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Inner Tie Rod End moog-ev800084 fits these vehicles:
Details

Front Inner Tie Rod | Cadillac Escalade | EV800084

2 Required Per Vehicle

Specific Fitment Distinctions:

  • Position: Front Inner.
2009-2013 Cadillac Escalade
  • (6.2L V8)
2009 Chevrolet Silverado 1500
  • Submodels: LS, LT, LTZ, WT
2010-2013 Chevrolet Silverado 1500
  • Submodels: LS, LT, LTZ, WT, XFE

4.8L V8, 5.3L V8, 6.2L V8

  • 2008-2009 Chevrolet Tahoe
  • 2008-2009 GMC Yukon
2010-2013 Chevrolet Tahoe
  • (5.3L V8)
2009 GMC Sierra 1500
  • Submodels: Denali, SL, SLE, SLT, WT
2010-2013 GMC Sierra 1500
  • Submodels: Denali, SL, SLE, SLT, WT, XFE
2010-2013 GMC Yukon
  • (5.3L V8, 6.2L V8)

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

MOOG moog-ev800084

Product Reviews for Front Inner Tie Rod | Cadillac Escalade | EV800084

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-ev800084

5 out of 5 based on 1 user reviews. Write a Review

R
verified_user

starstarstarstarstar" Very impressed "

Fit perfectly, easy install.

verified_user Verified Buyer - Ricky Sehon - . MOOG moog-ev800084 - 5 out of 5
Fitment for moog-ev800084
YearsMakeModelSubModelPositionEngine Base
2007 - 2014CadillacEscalade ESVFront Inner
2007 - 2013CadillacEscalade EXTFront Inner
2007 - 2008, 2014CadillacEscaladeFront Inner
2009 - 2013CadillacEscaladeFront Inner6.2L V8
2007 - 2013ChevroletAvalancheFront Inner
2007 - 2008ChevroletSilverado 1500Front Inner
2009ChevroletSilverado 1500LS, LT, LTZ, WTFront Inner
2010 - 2013ChevroletSilverado 1500LS, LT, LTZ, WT, XFEFront Inner
2007 - 2014ChevroletSuburban 1500Front Inner
2007, 2014ChevroletTahoeFront Inner
2008 - 2009ChevroletTahoeFront Inner4.8L V8, 5.3L V8, 6.2L V8
2010 - 2013ChevroletTahoeFront Inner5.3L V8
2007 - 2008GMCSierra 1500Front Inner
2009GMCSierra 1500Denali, SL, SLE, SLT, WTFront Inner
2010 - 2013GMCSierra 1500Denali, SL, SLE, SLT, WT, XFEFront Inner
2007 - 2014GMCYukon XL 1500Front Inner
2007, 2014GMCYukonFront Inner
2008 - 2009GMCYukonFront Inner4.8L V8, 5.3L V8, 6.2L V8
2010 - 2013GMCYukonFront Inner5.3L V8, 6.2L V8
GradePremium
OEM part numbers MOOG EV800084 replaces

MOOG EV800084 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
General Motors15254060
General Motors19178561

It also replaces these original equipment service part numbers.

Service brandService part number replaced
ACDelco45A2169

question_answer Customer Questions and Answers


Question:
Can you provide the specifications of the moog-ev800084?
Answer:
The moog-ev800084 has a length of 12.53 inches, the outer tie rod thread is m16-1.5, shaft diameter is .645 inches, rack end thread is m24-2.0.

Question:
How do you lubricate the flexible end of the inner tie rod for the rack and pinion?
Answer:
You do not grease it. It is sealed at the factory and there is a rack/pinon bellows boot that covers the inner tie rod.

Question:
The box includes 1 or 2?
Answer:
All Moog tie rods are sold individually. Not in pairs.

Question:
Does the tie rod end come with the rubber boot because it wasn't seen in the pic or is that separate?
Answer:
The rack/pinion bellows boot does not come with moog-ev800084. It is sold separately.

Question:
Is there a dust boot on / or required for inner tie rod EV800084?
Answer:
moog-ev800084 does not include the bellows boot. It is sold separately.

Question:
Is part number ev800084 really sealed or does it come with a grease fitting?
Answer:
Part number ev800084 is sealed.