unarchive In The Box of moog-k6665 keyboard_arrow_down
- Qty 1 Stabilizer Bar Link (Not sold in pairs)
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog's Sway Bar Endlinks
A sway bar, or anti-roll bar, is designed to keep all four wheels solidly in contact with the road, track, or trail during a turn. But your sway bar doesn't do this job alone. Sway bar endlinks connect the sway bar to the rest of your suspension. Without these links your sway bar would just hang there, taking up space. Similarly, if your links are damaged or worn then your sway bar will not be performing at it's best.
Moog's line of sway bar endlinks come in a variety of shapes and styles, each one designed specifically for the vehicle it's listed for. Known for their high-quality parts, Moog stays true to form with each of their endlink designs. Maximize your vehicle's performance and value with a set of Moog's sway bar endlinks, all covered by Moog's lifetime warranty handled in-house here at DST.
Product Reviews for moog-k6665 | Front Sway Bar End Link | 02-03 GMC Envoy
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k6665
starstarstarstarstar" Easy to install "
Removing the old one can be tricky. You will need an allen head wrench to hold the threaded stud and a open wrench to remove the nut. Have a propane torch to heat up the nut if it doesn't loosen up. Be careful not to let the allen head get stripped while holding when you are turning the nut. Worst comes to worst, get a saw-zall and cut the nut off. You don't need the old one so cut it off if the nut is stubborn. Install the Moog sway bar link is as easy as knowing your ABCs. One thing I like about the Moog is they have a grease fitting.
verified_user Verified Buyer - Ely Yee - . MOOG moog-k6665 - 5 out of 5