unarchive In The Box of 61151 keyboard_arrow_down
- 2 of Front Sway Bar Frame Bushings - 62064
- 2 of Front Sway Bar End Bushings - 63049
- 2 of Super Grease - 19-1750-001
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Prothane Sway Bar Bushings
A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long-lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Use Prothane's Super Grease
The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.
Product Reviews for Front Sway Bar Bushings - 25.4 mm | Ford E250 | 61151
- 5 Star (3)
-
-
- 75%
-
- 4 Star (1)
-
-
- 25%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Prothane 61151
starstarstarstarstar" Wery good quality. "
Difficult to press it into the main bearing axles. But my wife found a brilliant method and then they went thru like knife in butter :-)
verified_user Verified Buyer - Oyvind Leiv Solhaug Lockertsen - . Prothane 61151 - 5 out of 5starstarstarstarstar" Quality parts, decent instructions "
Parts purchased after research by a friend to determine compatibility with E-450. Installation of I-beam bushings difficult, removal of the old ones worse, requires an air chisel. Ford issue, no fault of these parts. Frame bushing installation a snap.
verified_user Verified Buyer - Stephen Bourgholtzer - . Prothane 61151 - 5 out of 5starstarstarstarstar_border" Good product - Tough install "
Had a tough time getting the lower bushings pressed into the sockets - once in they should hold up well as these are some tough bushings. I would recommend them but patience is required to get them installed.
verified_user Verified Buyer - Bill Holzem - . Prothane 61151 - 4 out of 5starstarstarstarstar" Awesome! "
Once the factory sleeves were removed from the I-beams. The new Prothane stabilizer bar bushings went right in, with a little work. But what a huge difference they made in the handling of a already difficult to control vehicle! I highly recommend these to anyone, never go back to standard rubber bushings again!
verified_user Verified Buyer - Ralph Lastoria - . Prothane 61151 - 5 out of 5compare_arrows Compare with Similar Parts
($2.00) more expensive
- starstarstarstarstar_border1
- Bushing Material: Polyurethane